Welcome!

Welcome to Satlover forums, full of great people, ideas and excitement.

Please register if you would like to take part. link..

Register Now

Alert: Don't Use Hotmail Email Accounts for registration

Collapse

Before Access to all Forums and Trial accounts you must need to activate your account Email address

Dreambox with rotor

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • zackmuc
    Junior Member
    • Dec 2011
    • 10

    Dreambox with rotor

    Hi

    I have a 800 and 800se but problems to move the rotor. it only makes small moves back and forth but not to the sat position. anybody with same problem or / and a solution.

    Regards

    Zack
  • josht5
    Senior Member
    • Jan 2012
    • 132

    #2
    Re: Dreambox with rotor

    It's usually the power supply's , are they originals or clones ?
    Try a higher amperage PS .

    Comment

    • lightfull
      Junior Member
      • Sep 2012
      • 10

      #3
      Re: Dreambox with rotor

      Do you have a motor with USALS support?
      Did you set the proper GPS coordinates for your position?

      Bye

      Comment

      • microchick
        Experienced Board Member
        • Apr 2012
        • 1162

        #4
        Re: Dreambox with rotor

        Check the setting if its set us as USALS or DISeqC.
        If Its USALS then you need to put the exact location of the satellite.
        If Its Diseqc 1.2 then you need to repositions the satellite sequence. Like Position 1, Position 2...... and so on
        Another tip id to recalculate the distance ( Option on the box).
        If you like my post, please don't hesitate to click on "Thanks"button. Thank you

        Comment

        • skytec
          Experienced Board Member
          • Mar 2010
          • 1207

          #5
          Re: Dreambox with rotor

          Possible is also a problem in mechanical parts of DISeqC motor.
          Is my post useful for you? Please press sigpic

          Comment

          • josht5
            Senior Member
            • Jan 2012
            • 132

            #6
            Re: Dreambox with rotor

            You can also try a non linux receiver with internal power supply to see if the motor works .

            Comment

            • microchick
              Experienced Board Member
              • Apr 2012
              • 1162

              #7
              Re: Dreambox with rotor

              Your motor needs resetting manually. Press East and West keys both together and hold them for about 15 seconds you will seee a green light on the motor. The motor will go to its facotry defaults. We need feedback from you.
              If you like my post, please don't hesitate to click on "Thanks"button. Thank you

              Comment

              • benchsirius
                Senior Member
                • Nov 2012
                • 168

                #8
                Re: Dreambox with rotor

                Try the connections, use some contact spray to clean them, especially this time of year moisture is a problem

                Comment

                • jilaliotmane
                  Newbie
                  • Nov 2012
                  • 1

                  #9
                  Re: Dreambox with rotor

                  Do you have a motor with USALS support?

                  Comment

                  • microchick
                    Experienced Board Member
                    • Apr 2012
                    • 1162

                    #10
                    Re: Dreambox with rotor

                    Try to move the motor manually first with the east or west button. You can also move motor with the nudge system within your receiver's settings. If nothing works then its time to reset it manually.
                    If you like my post, please don't hesitate to click on "Thanks"button. Thank you

                    Comment

                    • sideralgr
                      Senior Member
                      • Dec 2012
                      • 118

                      #11
                      Re: Dreambox with rotor

                      Originally posted by benchsirius
                      Try the connections, use some contact spray to clean them, especially this time of year moisture is a problem
                      also the obstacoles should be taken into consideration. some satellites can be covered in the dish rotation

                      Comment

                      Working...