Receivers Flash Technical

[Hunk2012]

Hello,


jKeys is a program primarily used to access memory on IRDs. It works by utlizing processor diagnostic devices via the JTAG port. This Soft-Ware has been used on STMicroelectronics STi***X (ST20 based core) and LSI SC2000 processors.

jtag Works With,

IRD, 1, "2700", 1, 1, 1, 1, 2, 2, 0x7FFFFFC0, 0x7FFFFFC4, 0x7FFFFFA0, 0x7FFFFFA8, 0x7FFEFFC4, 0x7FFEFFC8, "10G", 1, 1
IRDFlash, 1, "Flash 1(29F400)", 0x2223, 0x7FF80000, 0x80000, 2, 2, 0

IRD, 2, "2800", 1, 1, 1, 1, 2, 2, 0x7FFFFFC0, 0x7FFFFFC4, 0x7FFFFFA0, 0x7FFFFFA8, 0x7FFEFFC4, 0x7FFEFFC8, "11R", 1, 1
IRDFlash, 2, "Flash 1(29F400)", 0x2223, 0x7FF80000, 0x80000, 2, 2, 0

IRD, 3, "3700", 1, 1, 1, 1, 2, 2, 0x7FFFFFC0, 0x7FFFFFC4, 0x7FFFFFA0, 0x7FFFFFA8, 0x7FFEFFC4, 0x7FFEFFC8, "10G", 1, 1
IRDFlash, 3, "Flash 1(29F400)", 0x2223, 0x7FF80000, 0x80000, 2, 2, 0

IRD, 4, "3800", 1, 1, 1, 1, 2, 2, 0x7FFFFFC0, 0x7FFFFFC4, 0x7FFFFFA0, 0x7FFFFFA8, 0x7FFEFFC4, 0x7FFEFFC8, "10L", 1, 1
IRDFlash, 4, "Flash 1(29LV160)", 0x22C4, 0x7FE00000, 0x200000, 2, 2, 0

IRD, 5, "3900", 1, 1, 1, 1, 2, 2, 0x7FFFFFC0, 0x7FFFFFC4, 0x7FFFFFA0, 0x7FFFFFA8, 0x7FFEFFF4, 0x7FFEFFF8, "11L", 1, 1
IRDFlash, 5, "Flash 1(29LV160)", 0x22C4, 0x7FE00000, 0x200000, 2, 2, 0

IRD, 6, "4700", 1, 1, 1, 1, 2, 2, 0x7FFFFFC0, 0x7FFFFFC4, 0x7FFFFFA0, 0x7FFFFFA8, 0x7FFEFFC4, 0x7FFEFFC8, "10H", 1, 1
IRDFlash, 6, "Flash 1(29LV160)", 0x22C4, 0x7FE00000, 0x200000, 2, 2, 0

[Fantom]

Re: Receivers Flash Technical

And what receiver are we sending these commands to via a jtag ?