dual lnb setup

[tibsom]

Re: dual lnb setup

im getting another receiver at the moment i have a 1m motorised system with single lnb do i just replace this with a dual lnb and select no motor on second reciever

No need to buy a dual lnb. A simple to way F connector splitter will do the job. this is the cheapest solution.

[satterino]

Re: dual lnb setup

Good morning everyone,
I need to know that noise figure needs focused on the second lnb on astra ?
This is because the tuner does not find me several channels.
thanks

[digicon]

Re: dual lnb setup

No need to buy a dual lnb. A simple to way F connector splitter will do the job. this is the cheapest solution.

Ermm no you cant do that either that is why you need a dual LNB or a Quad for 4 outputs and an Octo for eight, If it was a simple as just putting in an 'F' splitter there would only be a need for a single LNB on everyones satellite dish.

Just to clarify an 'F' splitter would work but you cvan only watch the same polarity frequency's at the same time as the other reciever.

so if box 1 was on a vertical transponder then box 2 can obnly watch a vertical transponder. with a dual lnb each box can view either Horizontal TP or Vertical TP seperately.