Tweet
Is possible to use cccam also without a sat box, what do you need? Just a tv with sat receiver enclosed, like Panasonic GW 20 or GT 20 or any by V serie. One Diablo cam WiFi and a router with WiFi compatible. I've tested this configuration: Panasonic GT20 and Diablo WiFi (use Underworld 2.05 or less).
This tv has a good Sat receiver, it receives all DVB-S and DVB-S2 (of course also a DVB-T and DVB-C are enclosed) it also handle 3D channels. The tv is able to scan all frequencies without any parameter (blind scan) or you can input just frequency and polarization and let it to find SR, FEC and kind of modulation. It can handle also a multifeed system (max 4 LNB) in DiseqC 1.0 (or 2.0). It recognize by himself what satellites have you installed. After the scan is ended it create 5 lists: all DVB-S, all tv, all fta, all scrambled, all radio and all HD channels. You're able to handle those lists and also you've other 4 preferred lists that you can handle like you wish. When you've organized your channels, you can start to work on best part, the sharing. Put your Diablo WiFi into programmer and open the folder add on, you'll find 3 folders one named cccam, open it and copy on your desktop the file (cccam) you'll find inside. Open the file from desktop and edit it coping inside your c line (you can copy more then 1 line but just the last will work it don't handles more then 1 line) save the file and transfer it into cam. Insert the cam into your tv and select from tv menu common interface, go in wifi and check for visible networks, choose your router from the list and click ok (I suggest to set off any password on wifi just for test). Go into cam menu and choose config and then add on, choose cccam server and click ok, if all works you'll see "connected" message. Now go on encrypted channel and enjoy!
This tv has a good Sat receiver, it receives all DVB-S and DVB-S2 (of course also a DVB-T and DVB-C are enclosed) it also handle 3D channels. The tv is able to scan all frequencies without any parameter (blind scan) or you can input just frequency and polarization and let it to find SR, FEC and kind of modulation. It can handle also a multifeed system (max 4 LNB) in DiseqC 1.0 (or 2.0). It recognize by himself what satellites have you installed. After the scan is ended it create 5 lists: all DVB-S, all tv, all fta, all scrambled, all radio and all HD channels. You're able to handle those lists and also you've other 4 preferred lists that you can handle like you wish. When you've organized your channels, you can start to work on best part, the sharing. Put your Diablo WiFi into programmer and open the folder add on, you'll find 3 folders one named cccam, open it and copy on your desktop the file (cccam) you'll find inside. Open the file from desktop and edit it coping inside your c line (you can copy more then 1 line but just the last will work it don't handles more then 1 line) save the file and transfer it into cam. Insert the cam into your tv and select from tv menu common interface, go in wifi and check for visible networks, choose your router from the list and click ok (I suggest to set off any password on wifi just for test). Go into cam menu and choose config and then add on, choose cccam server and click ok, if all works you'll see "connected" message. Now go on encrypted channel and enjoy!
Comment