RS233 (Com port) and usb-rs232 - Connect your reciever to PC

[EUROASTRA]

With this cable you can connect your sat-reciever with PC

More info about USB-RS232 see in attacment

[bong1]

Re: RS233 (Com port) and usb-rs232 - Connect your reciever to PC

and what do you use to decode chanels when connected

[anacondama]

Re: RS233 (Com port) and usb-rs232 - Connect your reciever to PC

and what do you use to decode chanels when connected

there are receivers that don't have an ethernet port so they use that kind of cable to run servers cccam newcamd abox ... using program like HDVB or NewcamdSTR through a PC
and many new laptop dont have a RS232 ( Serial port) so they should use that kind of converter to do the job

[vimmers]

Re: RS233 (Com port) and usb-rs232 - Connect your reciever to PC

I have usb-rs232 but not detected by windows
have you an other solution please

if u know who there built the cable
they should have a driver for it

[findeciclo]

Re: RS233 (Com port) and usb-rs232 - Connect your reciever to PC

You must note that there are 2 types of RS232 cable.
1.- Null modem
2.- DB9

The first one is the one EUROASTRA has showed us at the first post of this thread, is called crossover cable.

The second cable is apparently the same, but it has no crossover cable, each pin ends on the same pin on the other side.

Some receivers use DB9 and other uses Null modem.

So, perhaps, your computer will not recognize any of them.

Best regards.

[robothobot]

Re: RS233 (Com port) and usb-rs232 - Connect your reciever to PC

Why not download Attached Files?

[gent59]

Re: RS233 (Com port) and usb-rs232 - Connect your reciever to PC

You can also try with a Null-modem emulator in __http://com0com.sourceforge.net/