Tweet
Loading and unpacking images to use in Barry Allen Multiboot
Loading and unpacking images to use in Barry Allen Multiboot
Start DCC.
In the left hand window open the folder named MB_IMAGES.
Now in the right hand window select the first secondary image you would like to run in mulitboot and highlight it, then click the < button to transfer it.
Shut Down DCC and now go to your plug-in menu on your DM800 and select barry allen.
Now select wizard for images at MB_IMAGES.
Then select extract NFI images from MB_IMAGES.Option 3.
You'll now see it all happening leave it for around 4 minuets and you'll see the Dm800 reboot.
At start up you will see your regular boot screen followed 30 seconds or so after by the read Barry Allen screen.
Now select with your remote the image you would like to run.
Thats it you running off your Flash Drive.
Start DCC.
In the left hand window open the folder named MB_IMAGES.
Now in the right hand window select the first secondary image you would like to run in mulitboot and highlight it, then click the < button to transfer it.
Shut Down DCC and now go to your plug-in menu on your DM800 and select barry allen.
Now select wizard for images at MB_IMAGES.
Then select extract NFI images from MB_IMAGES.Option 3.
You'll now see it all happening leave it for around 4 minuets and you'll see the Dm800 reboot.
At start up you will see your regular boot screen followed 30 seconds or so after by the read Barry Allen screen.
Now select with your remote the image you would like to run.
Thats it you running off your Flash Drive.