An example how to install multi LNB dish.

[findeciclo]

Right here I attached an example of installation of dish to get the most out of our sat receivers.

Configuration made of 100cm dish LNB and having as the W3 Main.

You can join the 4 satellites (Astra, Hotbird, Intelsat, W3) in a single cable with a 4-input disecq.

[fandm]

Re: An example how to install multi LNB dish.

That should be possible with those 3 sats only 6 degree overall.

[fandm]

Re: An example how to install multi LNB dish.

you will need 3 lnb's if you want 3 different sats also you need a arm that will let you mount 3 lnb's on your dish.

[besit]

Re: An example how to install multi LNB dish.

what kind of lnb sould I use for 13-16-19 E configuration?

There is a monoblock lnb including the three satellites?

These 3 lnb's supposed to be very close to each other.
My setup is 4.8-9-13, 110cm dish, about 4-5 cm between 4.8 and 9, almost no gap between 9 and 13.
One interesting detail - It's very hard to find 9E, you are always catching 13E, but when you place second lnb near staying in focus 13E, you catch 9E immediately

[toby69]

Re: An example how to install multi LNB dish.

you would need one of these to go between 13e/19e

INVERTO SLIM PENCIL BULLET HD LNB

[toby69]

Re: An example how to install multi LNB dish.

what kind of lnb sould I use for 13-16-19 E configuration?

There is a monoblock lnb including the three satellites?

there was a monoblock being manufactured some time back, it was called the
pyrmid triple, but due to lacking orders it was not produced.