Welcome!

Welcome to Satlover forums, full of great people, ideas and excitement.

Please register if you would like to take part. link..

Register Now

Alert: Don't Use Hotmail Email Accounts for registration

Collapse

Before Access to all Forums and Trial accounts you must need to activate your account Email address

Problem in 10892 H

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • Jerry2020
    replied
    Re: Problem in 10892 H

    I heard that in some areas some transponders are very weak due to mobile stations.

    If it's the case, is there a solution to that?

    Leave a comment:


  • Jerry2020
    replied
    Re: Problem in 10892 H

    I entered the frequency directly, I even tried other receivers, but in vain.

    Leave a comment:


  • vimmers
    replied
    Re: Problem in 10892 H

    have u tried to change the satellites.xml file

    Leave a comment:


  • Jerry2020
    replied
    Re: Problem in 10892 H

    I tested the transponder on another dish on the same roof. There was a very weak signal.

    Leave a comment:


  • peremacedonia
    replied
    Re: Problem in 10892 H

    Waves may be very frustrating.In my work place it was car plates readers and when somebodey want to open trunk or door or to start car with remote it is inposible.Both work on same freq.and it very funny to watch from side

    Leave a comment:


  • powerman
    replied
    Re: Problem in 10892 H

    some area in the roof have microwave and sometimes effective on signals i have experience about it when i change location of my dish in my roof i could take signals better

    Leave a comment:


  • uttnls
    Guest replied
    Re: Problem in 10892 H

    Originally posted by Jerry2020
    Yes, I tried 2 others, with the same result.
    Then it looks like a problem from the dish alignment or LNB.

    Ask a neighbor to let you connect to his antena and see if the signal is better (you said that in your roof are lot's of dishes why don't ask a neghbor to let you connect for test to his antena, and better swap the dishes and you'll see how his reciver works on your's antena)

    Originally posted by powerman
    If its possible change location 1 or 2 meter and try again
    Not necesarly it could also try to move it under one meter for begining for tests, and see if the signal is better

    Leave a comment:


  • powerman
    replied
    Re: Problem in 10892 H

    Originally posted by Jerry2020
    This is very hard
    Many people live in the building, and the roof is crowded with dishes
    If its possible change location 1 or 2 meter and try again

    Leave a comment:


  • Jerry2020
    replied
    Re: Problem in 10892 H

    Originally posted by uttnls
    Do you have other box to try it, you could ask a friend or something just for testing to see what signal you have with other boxes
    Yes, I tried 2 others, with the same result.

    Leave a comment:


  • uttnls
    Guest replied
    Re: Problem in 10892 H

    Originally posted by Jerry2020
    Thanks, I saw it before since I looked a lot for soution but in vain.
    I tried disconnecting the cable and take directly from the dish to the box with the same result.

    I don't have a wireless phone, but I don't know if anyone in the building have one.

    I tried close freqs but got the same result.

    On HB, the channels were working but the signal level was remarkably weaker than other frequencies.

    There seems to be no solution.
    Do you have other box to try it, you could ask a friend or something just for testing to see what signal you have with other boxes

    Leave a comment:


  • Jerry2020
    replied
    Re: Problem in 10892 H

    Originally posted by powerman
    if you change location of your dish might be effective.
    This is very hard
    Many people live in the building, and the roof is crowded with dishes

    Leave a comment:


  • powerman
    replied
    Re: Problem in 10892 H

    if you change location of your dish might be effective.

    Leave a comment:


  • Jerry2020
    replied
    Re: Problem in 10892 H

    Originally posted by odysseas1991
    Interesting, I was reading about a similar problem on another forum where this exact transponder would not pick up on hotbird. Many people said that it was a LNB problem, in that it wasn't in its range, while the problem was solved. The solution was apparently the cable... Il pm you the link it thats ok...
    Have a look, although its not on nilesat it might help. Another suggestion is slighltly tweaking the frequency in the transponder input screen?

    Other than that Im not sure what else it could be... Gd luck and post the solution when you have found it.
    Thanks, I saw it before since I looked a lot for soution but in vain.
    I tried disconnecting the cable and take directly from the dish to the box with the same result.

    I don't have a wireless phone, but I don't know if anyone in the building have one.

    I tried close freqs but got the same result.

    On HB, the channels were working but the signal level was remarkably weaker than other frequencies.

    There seems to be no solution.

    Leave a comment:


  • uttnls
    Guest replied
    Re: Problem in 10892 H

    Originally posted by Jerry2020
    I have wireless router. I unplugged it, but with the same result. But I think other people in the building have wireless routers. Could this affect the dish?
    On this particular transponder there are many people that also were using DECT phones and they reported signal issues.

    That's why i was almost 100% sure that a DECT phone is the problem or something based on Wireless

    Leave a comment:


  • uttnls
    Guest replied
    Re: Problem in 10892 H

    Odysseas1991 you could be banned for that link

    Leave a comment:

Working...