Problem in 10892 H

[zoran89]

Re: Problem in 10892 H

Sorry, I can't understand

I have something like this and I cant watch TV and use this at same time in the same room, so you could try to shutdown things one by one until you find what is make interference.

Or you dont have right paremeters, try to enroll this manuel, 10892 H 27500 3/4


Reciver cant have problem with only one freqency,
you sad that you having problem with only this transponder and it is not only one on this beam,
LNB must work on 10892 if it work on 10900.

So it must be some interference with other devices in your house.

[Jerry2020]

Re: Problem in 10892 H

It must be that something interfering on this freqenci, I have some masseur and when I turn on him picture on TV start flashing.

Sorry, I can't understand

[zoran89]

Re: Problem in 10892 H

It must be that something interfering on this freqenci, I have some masseur and when I turn on him picture on TV start flashing.

[Jerry2020]

Re: Problem in 10892 H

Its transponder problem your lnb or wires its ok
u may try to move antena up down left right
1-2 mm to get strong signal

I have a motor, and I tried to move east and west, with no success.
But it is the same satellite, other tp's have high signal, only this very weak.

[peremacedonia]

Re: Problem in 10892 H

Its transponder problem your lnb or wires its ok
u may try to move antena up down left right
1-2 mm to get strong signal

[Jerry2020]

Re: Problem in 10892 H

do you have a universal LNB or a very old LNB? The old lnbs dont support the high band, so this could be the problem...

I have a universal lnb, all other tp's work except this damned one and those very close to it.
I even changed the lnb and the same problem was there.

[zoran89]

Re: Problem in 10892 H

He have problem with low band not high band, and it is onli one frequenci so LNB is working properly.

[Flostafa]

Re: Problem in 10892 H

do you have a universal LNB or a very old LNB? The old lnbs dont support the high band, so this could be the problem...

[Jerry2020]

Re: Problem in 10892 H

i think this TP sometimes have problem

Could you explain more please, it is either weak or no signal on all satellites.

[skytec]

Re: Problem in 10892 H

I tried to take directly from the dish and I had the same problem.
Anyway, should the shield stop interference, and I think electricity is 50/60 Hz which shouldn't interfere with the much higher frequencies of satellites, right?

This is very strange. Could be a problem in the receiver? Maybe some internal interference in tuner ... Try a different receiver?

[powerman]

Re: Problem in 10892 H

i think this TP sometimes have problem

[Jerry2020]

Re: Problem in 10892 H

He could change LNB it is not expensive but it 99% will not solve his problem. 90% is not even this but try anyway, make some distance betwin sattelit cable and electrical wires, sometimes electromgnetic can distrupt some freqency.

I tried to take directly from the dish and I had the same problem.
Anyway, should the shield stop interference, and I think electricity is 50/60 Hz which shouldn't interfere with the much higher frequencies of satellites, right?

[Jerry2020]

Re: Problem in 10892 H

Did you try exchanged LNB for another one ??

Yes, I changed it and exactly the same problem

[zoran89]

Re: Problem in 10892 H

He could change LNB it is not expensive but it 99% will not solve his problem. 90% is not even this but try anyway, make some distance betwin sattelit cable and electrical wires, sometimes electromgnetic can distrupt some freqency.

[skytec]

Re: Problem in 10892 H

Did you try exchanged LNB for another one ??