ftp disconnected

[maxdigitalxp1000]

Hello people, I have a question, We have a vu plus solo 2 are bought and want to come in with dreambox control center. But once we found the vu + and he is trying to connect and then says ftp disconnected. What else must I do to be able to come?

With kind regards,

Maxdigitalxp1000

[kostis]

Re: ftp disconnected

Try another way like WinSCP, also some version crash so try new and old versions. before check also your internet connection, its better wired.

[BlueIsMyColor]

Re: ftp disconnected

You can try VuCC Vu+ Control Centre V0.7

How to Use VUCC
---------------
1. Run the VUCC.exe application.
2. Enter the IP address of your Vu+ in the IP Address field, example 192.168.1.5
If your using a private local IP address enter the IP like this: 010.000.000.001
3. If you have changed the password on your receiver, enter the password in the password field
otherwise leave blank.
4. Click Connect Button

regards

[ProgSkEEtO]

Re: ftp disconnected

I use for my boxes always FileZilla and never had some problems with it, maybe you should give it a try.

[vimmers]

Re: ftp disconnected

under connection type (check that its are set to router)
under experts (check that ftp type are set to active)

[gianni253]

Re: ftp disconnected

You'd better use an ftp client that shows connection log so that you can troubleshoot problem by error analysis and not proceed with trial and error process.

[KVF1966]

Re: ftp disconnected

ftp connection, first you need to properly set up and configured after the ip address in the receiver can be done ping. I use total commander ftp connection.

[rob45]

Re: ftp disconnected

hi in your dcc do a scan for your box then that way you get your proper ip adress.

[peremacedonia]

Re: ftp disconnected


Find proper ip enter username and password and you are conected