NO/jumping SNR

[rootdbs]

I was looking at a movie last night, and its starts to rain, and now my SNR is lost, dont know why, have been out to fix the satellite, but still the same. Is it the cabel ? becouse now its not raining, and its still the same.

Cabel:

Cabel:

Box "DM800HD SE":

Conf:

Conf:

Sirius:

Sirius:

Sirus:

Thor:

Thor:

Thor:


as you see the snr is jumping all over, is it the cabel thats not working or is it the diseqc?

Thx.

[bokkie]

Re: NO/jumping SNR

You might have water ingress in your cable or diseqc, as you say it happened when it was raining. Is everyhting well sealed? Have a look and see if water could have gotten in anywhere.

[rootdbs]

Re: NO/jumping SNR

not good sealed :/ so thats the reason, i going to upload a pic of the diseqc now



I think this is the problem...

[duhoki]

Re: NO/jumping SNR

Can you try another sat and see if signal or not. It sounds like water damage as bokkie say. Clas ohlson have great waranty on their product. So try buy one and test with it, and just return it after test.

[rootdbs]

Re: NO/jumping SNR

Can you try another sat and see if signal or not. It sounds like water damage as bokkie say. Clas ohlson have great waranty on their product. So try buy one and test with it, and just return it after test.

Going to try, but now i did buy a better one, waterproof




But, in the settings, shuld it be DiSEqC A/B OR Toneburst A/B, on the old one, I did use Toneburst, and got signals ?

[gianni253]

Re: NO/jumping SNR

If the prime suspect is diseqc switch, just choose one satellite and bypass the switch with a patch adapter (female/female).
Erratic behavior should disappear.

[bokkie]

Re: NO/jumping SNR

Make sure you seal all the connections off to protect from water. self-amalgamating tape is recommended and it's not that expensive.

[mirny]

Re: NO/jumping SNR

connect lnb straight to the receiver, chcek if its still jumping, if not diseqc switch is faulty. If yes align your dish. i had diseqc which was fully covered with ice, and there was not problem at all tested same satelilites 5E, 0.8W and 4/5W, brand is emp centauri, for outer usage. so let us know if your new diseqc switch helped

[rootdbs]

Re: NO/jumping SNR

No jumping anymore, but "cant" find the sat`s. it jump to 100 for less then a secound, then nothing, 0.. someone know why?

[gianni253]

Re: NO/jumping SNR

No jumping anymore, but "cant" find the sat`s. it jump to 100 for less then a secound, then nothing, 0.. someone know why?

Did you replace the switch ?
What are the testing conditions now ?

[rootdbs]

Re: NO/jumping SNR

Did you replace the switch ?
What are the testing conditions now ?

Yes, i did replace the switch, and now its working and i changed one LNB. "didnt get any signals on it"
Now working 100%!
Here is for Thor:

And for Sirius:


But i got another problem, when i search for channels, i only get from Sirius, some help ?

[kalpikos]

Re: NO/jumping SNR

Hi mate

Are you sure that your dish is correct aligned?
Because only snr bar is not enouph to open a channel,
you must have signal in agc bar (the quality of signal).
Maybe the rain and the wind cause a moving of your dish.

[rootdbs]

Re: NO/jumping SNR

Hi mate

Are you sure that your dish is correct aligned?
Because only snr bar is not enouph to open a channel,
you must have signal in agc bar (the quality of signal).
Maybe the rain and the wind cause a moving of your dish.

Hi!
I got all channels from Viasat "Sirius", but i only get 8 channels from Int.707/Thor "0,8W". What can be the problem ?

[bokkie]

Re: NO/jumping SNR

Might want to have a look at your dish alignment.

[rootdbs]

Re: NO/jumping SNR

Might want to have a look at your dish alignment.

Im not following you mate, can you explane ?