had the box 2 days bought for the kids room, as a fta box great picture etc, now when you try to advance the box patches etc, it turns into a nightmare!!!
i don't know wether cccam can be discussed here, so pm would be good.
at the moment black screen ,used the rom to wipe it,and added new patch, don't even know if new patch is on or not because no menu anf black screen.
anyhow now nothing at all a certain gorum mug you off if you ask to many questions,and you get replies in the way off links and shared text files to download which don't make sense,so what to do now, have a brand new box, with no menu and black screen,whats the best patch because none seem to work, am i right in saying that the code in super settings has to be entered manually via the remote? or can you edit the sharetxt file and upload via usb stick?? just going round in circles before it gets binned,i'm no mug have a dm800hd a vu-duo and a tm twin so know me way round linux pretty comfortably and have installed fully motorised systems etc,its either me or this box is temperamental or just not well explained enough, theres enough satisfied customers with these boxes, but no idiots guide exists,
on the ethernet configuration, theres 2 ip addresses i've manually inputed one, do they both have to be identical,on the cccam do i have to do a text file for each individual line, or do i put all 4-lines on a text file and they transfer in to the super settings cccam.config file,
do they have to be numbered i.e
and is it like below;
with the brackets { }
examples,
1{C: 1200,atcan'tconnect.com,steve,pass}
2 as above and the same for line 3 and 4,
and what about the spaces between the original line,is that crucial etc,
also the ethernet configuaration, i've manually inputted ip address, and when i ping it takes you to another ip, do both the ip addresses have to match on ping test, any help much appreciated.
i've sorted the black screen problem turns out it was the hdmi lead which came with the box, i'd underestimated the box at being worse than it probably is,thanks again..
i don't know wether cccam can be discussed here, so pm would be good.
at the moment black screen ,used the rom to wipe it,and added new patch, don't even know if new patch is on or not because no menu anf black screen.
anyhow now nothing at all a certain gorum mug you off if you ask to many questions,and you get replies in the way off links and shared text files to download which don't make sense,so what to do now, have a brand new box, with no menu and black screen,whats the best patch because none seem to work, am i right in saying that the code in super settings has to be entered manually via the remote? or can you edit the sharetxt file and upload via usb stick?? just going round in circles before it gets binned,i'm no mug have a dm800hd a vu-duo and a tm twin so know me way round linux pretty comfortably and have installed fully motorised systems etc,its either me or this box is temperamental or just not well explained enough, theres enough satisfied customers with these boxes, but no idiots guide exists,
on the ethernet configuration, theres 2 ip addresses i've manually inputed one, do they both have to be identical,on the cccam do i have to do a text file for each individual line, or do i put all 4-lines on a text file and they transfer in to the super settings cccam.config file,
do they have to be numbered i.e
and is it like below;
with the brackets { }
examples,
1{C: 1200,atcan'tconnect.com,steve,pass}
2 as above and the same for line 3 and 4,
and what about the spaces between the original line,is that crucial etc,
also the ethernet configuaration, i've manually inputted ip address, and when i ping it takes you to another ip, do both the ip addresses have to match on ping test, any help much appreciated.
i've sorted the black screen problem turns out it was the hdmi lead which came with the box, i'd underestimated the box at being worse than it probably is,thanks again..
Comment