Hellassat Package Bulsatcom Using Bulcrypt

[odysseas1991]

Re: Hellassat Package Bulsatcom Using Bulcrypt

Guys thanks for the replies, i guess then i should give up on playing with ftp and telnet.

i have seen the wire in that link but what confuses me is which program and how will i install in the yumatu receiver?

which program decrypts bulcrypt encryption and how i can install that program

in other forms there was a talk about how some receivers are open source, emaning you can make adjustments on them and how some receiver software can not be updated, meaning i cannot use any other software on this yumatu other than the one that it came installed with

There are many really good budget receivers that will more than do the job if you are willing to spend money. You can get a TM5400Ci+ pretty cheap off ebay. This gives you Standard definition only however but the channels on Hellas sat are SD anyway. If you want a really good all rounder that is full HD, fast, reliable, and really sensitive tuner,, then the TM5402HD will do for £140...

[vanbasten]

Re: Hellassat Package Bulsatcom Using Bulcrypt

Guys thanks for the replies, i guess then i should give up on playing with ftp and telnet.

i have seen the wire in that link but what confuses me is which program and how will i install in the yumatu receiver?

which program decrypts bulcrypt encryption and how i can install that program

in other forms there was a talk about how some receivers are open source, emaning you can make adjustments on them and how some receiver software can not be updated, meaning i cannot use any other software on this yumatu other than the one that it came installed with

[kostis]

Re: Hellassat Package Bulsatcom Using Bulcrypt

will a wire similar with this help him do the job? hxxp://www.ebay.co.uk/itm/USB-2-0-TO-RS232-SERIAL-DB9-9-PIN-ADAPTER-CABLE-GPS-PDA-FREE-POSTAGE-IN-UK-/220918926009?pt=UK_Computing_Parallel_Serial_PS_2& hash=item336fcb4ab9

[kalpikos]

Re: Hellassat Package Bulsatcom Using Bulcrypt

Kostis, i logged on to my wireles router page and from there i can see two devices, one my laptop and another one assuming it is my satellite receiver. I have its ip address however i am not sure how to connect to or try to connect to my receiver,

i downloaded the filezille ftp program but from still cannot connect to the receiver, do you know how to use telnet Kostis?

sorry mate,
but Yumatu hd receiver can't connect by the way you think
Your box can communicate with a pc only by RS232 cable.
This means, that you can only use this port to update the firmware of your box.
Nothing more.
Only a dreambox can do what you want.

[vanbasten]

Re: Hellassat Package Bulsatcom Using Bulcrypt

Kostis, i logged on to my wireles router page and from there i can see two devices, one my laptop and another one assuming it is my satellite receiver. I have its ip address however i am not sure how to connect to or try to connect to my receiver,

i downloaded the filezille ftp program but from still cannot connect to the receiver, do you know how to use telnet Kostis?

[kostis]

Re: Hellassat Package Bulsatcom Using Bulcrypt

i see, i think that is where i am getting stuck. i dont know how to load up that software initially. in another post i am trying to figure out if it is possible to log on to my receiver through internet.

how did you get softcam in your receiver. did you buy it with program already installed?

its better to solve your problems one by one, all will be easyer when you get connect with a pc so start from there. can you find your box ip?

[vanbasten]

Re: Hellassat Package Bulsatcom Using Bulcrypt

i see, i think that is where i am getting stuck. i dont know how to load up that software initially. in another post i am trying to figure out if it is possible to log on to my receiver through internet.

how did you get softcam in your receiver. did you buy it with program already installed?

[odysseas1991]

Re: Hellassat Package Bulsatcom Using Bulcrypt

softcam is a different version of cccam? do you have any information as to how to install softcam to a remote satellite receiver?

Yes different, although I am not sure exactly how to explain it in technical terms. I have no information because it is dependent on your receiver, but I am sure you can find something on the internet! I do believe like I said in the previous post is that you have to first load up some software on the box remotely first...

[vanbasten]

Re: Hellassat Package Bulsatcom Using Bulcrypt

softcam is a different version of cccam? do you have any information as to how to install softcam to a remote satellite receiver?

[odysseas1991]

Re: Hellassat Package Bulsatcom Using Bulcrypt

are you using satlover servers to watch the bulcrypt channels on bulsat? if not what are you using?

I do not know about the servers but I think there is a way using softcam I believe that may work. It may require you to patch your box with software however.

[vanbasten]

Re: Hellassat Package Bulsatcom Using Bulcrypt

bulsat has a very good coverage for bulgaria and greece, so you can use even a 60cm dish

are you using satlover servers to watch the bulcrypt channels on bulsat? if not what are you using?

[sideralgr]

Re: Hellassat Package Bulsatcom Using Bulcrypt

"i am sure that i am getting bulsatcom channels because when they were using irdeto i was able to watch them but once they switched to bulcrypt things got trickier." You can do a satellite scan and see if the new search find those channels.

"the satellite box is not connected to my computer." why you cant connect? on most receivers you just need an internet connection and a free program on you pc.

bulsat has a very good coverage for bulgaria and greece, so you can use even a 60cm dish

[kostis]

Re: Hellassat Package Bulsatcom Using Bulcrypt

thanks guys for the replies. I really do appreciate it.

I am using a yumatu hd receiver, mersat hd to be more precise.i bought it with the softwares already installed so all i am doing is entering the salover clines using the remote control.

the satellite box is not connected to my computer.

so do i need to have a tb card connected to my computer to be able to use mgcamd software?

i am sure that i am getting bulsatcom channels because when they were using irdeto i was able to watch them but once they switched to bulcrypt things got trickier.

any further help would be greatly appreciated

"i am sure that i am getting bulsatcom channels because when they were using irdeto i was able to watch them but once they switched to bulcrypt things got trickier." You can do a satellite scan and see if the new search find those channels.

"the satellite box is not connected to my computer." why you cant connect? on most receivers you just need an internet connection and a free program on you pc.

[vanbasten]

Re: Hellassat Package Bulsatcom Using Bulcrypt

sorry but i did not understand, what do you mean by updated on softcam? is it an update of a software?

[joseram2000]

Re: Hellassat Package Bulsatcom Using Bulcrypt

attempts to locate in goolge BulCrypt k *** appears that this system accepts updated on softcam