skybox m3 help

[pan1300]

Re: skybox m3 help

i saw it again in another post you had "(make sure you also enter the underscore '_' right!)" sorry but my English are poor and so its my knowledge on cardsharing. i didn't get it...

hi kostis

Some stb's have problems (think some even not possible) to enter the 'underscore' by the remote control unit (eg ID-part of a satlover cline ... xxE2A18A_8368E0xx ... -> satlover clines have always an '_' in the ID).
Hope I'm clear, if not: just ask

[gelboy]

Re: skybox m3 help

today i got one of the free satlover server clines to work for about 10 seconds before it went off looks like on the skybox m3 it doesnt like the cline being entered by remote because as soon as i tried it with usb it went straight on thanks for everyones help gelboy

[mahrkpat]

Re: skybox m3 help

UPDATE

today i got one of the free satlover server clines to work for about 10 seconds before it went off looks like on the skybox m3 it doesnt like the cline being entered by remote because as soon as i tried it with usb it went straight on thanks for everyones help gelboy

Even easier to update cline using the lan tool especially when you are trying out
different clines don't have to keep plugging usb stick into pc then stb etc...
I would recommend you try it out good for updating firmware as well.

[gelboy]

Re: skybox m3 help

i dont want new cline on this box gonna go motorised just wanted to know i could imput a cline and get it working now to figure out which setup to get and prices

[pan1300]

Re: skybox m3 help

i dont want new cline on this box gonna go motorised just wanted to know i could imput a cline and get it working now to figure out which setup to get and prices

hi

then I suggest you first get your motor, and then decide what you'll do (depending on what sats you can receive - check with freelines here (and as you said before: you could get a premium here) or ask a testline) ; you're also right that like this you won't need to change the clines once entered.