Gigablue CCCam problem, need help

[yetvart]

Few days I'm not able to make work my c lines on c**Cam, I'm using a Gigablue HD800SE Combo, I've two c lines, one for DVBT and one for Sat. I changed the box image several times to try different images. The images I tried are: openVIX, Openmips, OpenAAF, Persianempire, SIF Jackal, SIF Koala (actually installed) HDF v5, HDF v6, Italysat, PBEnigma II VX. Each time I was able without difficulties to install and run C**Cam but now nothing, I tried to install starting from old bootloader, than new bootloader and than immage but even my old backup gigablue file doesn't work. Please Help.

[Satphoenix]

Re: Gigablue CCCam problem, need help

What cccam do you use? Version?
And are your clines working? Did you test?
What is in your cccam.cfg?

Many reasons can cause such a problem?

[clapesat]

Re: Gigablue CCCam problem, need help

trial to proceed in steps:
After installing an image, check the network and if the receiver is configured with the correct addresses, then you go to install the cccam and then checks the presence of the file CCcam.cfg.
then see if your cline works.

[pan1300]

Re: Gigablue CCCam problem, need help

hi

are you sure network/ip is ok? check router for latest soft, and if so: try re-installing it.

[bokkie]

Re: Gigablue CCCam problem, need help

Make sure you are using the correct cam for the image you are running.
If using Vix, download the cam from the openvix website as sometimes they are not compatible with eachother.

[Jerry2020]

Re: Gigablue CCCam problem, need help

Can you be clearer on what exactly is not working, CCcam itself, or the lines aren't connecting?
Did you have a look at the CCcam web interface?

[vimmers]

Re: Gigablue CCCam problem, need help

have you tried to upload keys to etc/keys
and see about the emukeys works in cccam
you can find keys on this site

[joseram2000]

Re: Gigablue CCCam problem, need help

eliminates softcam plugin, which is where the cccam, and re-download and reinstall the latest plugin, then ftp in directory etc, cccam.cfg, edit and write the line

[sideralgr]

Re: Gigablue CCCam problem, need help

try server3 of this site, the cline should work in your cccam

[parsonline]

Re: Gigablue CCCam problem, need help

first check your connection internet and and make sure your receiver have connection ip
attention your emu compatible with receivers image. then ping server and after that enter toy var\key\cccam.cfg

[fandm]

Re: Gigablue CCCam problem, need help

Hi does it show the cline when you are in network section of the menu, and does it show connected with ??? amount of cards, or disconnected,if it shows not connected try other lines.

[joseram2000]

Re: Gigablue CCCam problem, need help

Got the blue key menu, there softcam puts a line, that line runs and displays the type of cccamm your version we want to use, there have activated the softcam? but not work