Technomate 6900 hd combo

[tom26]

Hi , can someone help i have a Technomate 6900 hd Super , how do i put in the C-Lines. i have the latest firmware 750 and add on, but when i go into the menu on the remote 8281 ware do i put the C-line, please reply

[thecrazybandit]

Re: Technomate 6900 hd combo

Is it a super model if not you cannot use c lines check to see if you have a Ethernet connection at the back of the box

[mahrkpat]

Re: Technomate 6900 hd combo

You can do the research your self there is lot you can learn by doing this here is a link to a thread in this for that will get you started:

http://www.satlover.eu/forum/rest-of-hdtv-receivers/36513-tm6900hd.html

[pan1300]

Re: Technomate 6900 hd combo

hi tom26

fyi see also: _http://www.satlover.eu/forum/technomate-hd/45726-6900-super-help.html

edited ... and right: also mahrkpat's link

[tom26]

Re: Technomate 6900 hd combo

i was wondering were to put the clines when i open the program CSinfo zip. folders are ETC\ SHARE\ VAR.

[Inter88]

Re: Technomate 6900 hd combo

Hey , Bro ...
Most of Sharing Packages are KU-Band Broadcasting
Such as Most of HD Packages .
It is better for you use Ku-Band System .

[tom26]

Re: Technomate 6900 hd combo

i have my C LINES but dont no where to put them in the zip folder csinfo you must of miss understud me.

[mahrkpat]

Re: Technomate 6900 hd combo

Have you looked at mine and pan1100's post both of have given you links on this forum to answer your questions.

your clines should look something like this:-

C: cccam.satlover.com 29478 07F89DD8_6D22CB7A www.satlover.com no { 0:0:3 }

These lines and each line must be entered into a slot including the right protocol as shown in the examples below.

slot0=
{
name: Connection_0
ip: satlover.com
user: 07F89DD8_6D22CB7A
password: www.satlover.com
protocol: cccam
deskey: 01 02 03 04 05 06 07 08 09 10 11 12 13 14
port: 29478
}

Once you have inserted all the right information into the Csinfo.txt file save it to the root of the USB stick where you have the patch and connect the USB stick to receiver.

Press USB button on remote, you will then get a screen asking for pin number, enter 0000 then select Data Transfer. Select the Phantom patch first and press ok, once the box has rebooted itself do the above again but this time select the CSinfo.txt file and press ok.

If the box does not reboot itself then reboot it then press the IP button on the remote and enter pin 0000 or from normal viewing TV screen enter 8281 to access server list. Select the 1st connection named Connection_0 (if you have used the Csinfo file) and press the RED button on the remote to turn it on.

Do the same for each connection you inserted in the Csinfo file so if you filled in 4 connections you need to turn on Connection_1 to Connection_4 and so on until they are all on.

(assuming password and remote code are same for all TM's)