blade bm7000 need help

[shinoxl]

hi newbie here,

bought a bm7000 over a year ago, the a guy a purchased it from didnt explain anything apart from plug it in and it will work...which it did, 6 months down the line channels gone, unplugged the box and left it...recently found out the box runs on clines? how do i get my box to work again , does it need new firmware and how do i go bout getting clines? im bham

help please

[bokkie]

Re: blade bm7000 need help

h**p://www.techkings.org/blade-media-satellite/24711-guide-putting-firmware-blade-media-7000s.html

The above link will help you in upgrading your firmware.

h**p://www.techkings.org/blade-media-satellite/28405-how-enter-cline-into-blade-media-picture-guide.html

This one will help you to enter cline. just replace the ** with tt in both links.

You can get a free cline to try out in the free servers section on this forum.
You might have to try a few as the server you have access to is spread all over the net and overloaded.
Remember, only one cline at a time.

[toby69]

Re: blade bm7000 need help

you enter lines simalar to this, (sample)

Select an empty line
Type :- CCCAM
Name or IP Address:- cccam.satlover.com (note do NOT enter the C (when you have typed it in hit exit on remote control and OK to save)
Port:- 06658 you can use the RC to enter this
ID:- 86854A67_36FC8D30 (note the underscore in the middle and use the FAV button to toggle between upper and lower case)
Password:- www.satlover.com (exit and OK)
Apply:- hit OK

ignore no { 0:0:3 }

hope this helps

[shinoxl]

Re: blade bm7000 need help

thanx bokkie, the links were really good. only one thing, the link with the firmware, the guy mentions its blade combo firmware and not blade bm7000s and mines is bm7000s, is there a link for bm7000s firmware?

[knap92]

Re: blade bm7000 need help

Hello;

Take look here...you can find evrythink wat you are looking for,Firmware and opthers thinks

h**p://www.blademedia.tv/bm7000ssupport.html

Good Luck

Thanks

[bokkie]

Re: blade bm7000 need help

After doing a quick ****** search, it appears that the official firmware doesn't support cccam. If you want to cs you have to use a patched firmware or 9991 menu enabled firmware. The link below has them.

h**p://www.world-of-satellite.com/forumdisplay.php?181-Blade-Media-BM7000s-Downloads

Just a thought. If you had channels before, It probably means you already have a patched firmware. Just not the latest one.
Give it a try before upgrading firmware.

[shinoxl]

Re: blade bm7000 need help

makes sense bokkie, will give the free server a try , ill see if that works with the current set up on my box , and failing that will update firmware...

[toby69]

Re: blade bm7000 need help

makes sense bokkie, will give the free server a try , ill see if that works with the current set up on my box , and failing that will update firmware...

---------------------------------------
free servers here,
dont forget, only 1 line, servers change daily approx 4/5pm

http://www.satlover.eu/forum/free-cardsharing-servers/37-satlover-servers-30-aug-2012-new-clines-free-for-all-members-update-start-again.html

[pan1300]

Re: blade bm7000 need help

makes sense bokkie, will give the free server a try , ill see if that works with the current set up on my box , and failing that will update firmware...

hi

little tip: take back-ups of settings/set-up/channels/... before you start experimenting/updating ... - will take you a little bit of time, but may save you more time afterwards ...

[shinoxl]

Re: blade bm7000 need help

toby you mention free servers, which sly channels do you get with these and do they just last for a day?

and pan1100, how do you back up?

[pan1300]

Re: blade bm7000 need help

toby you mention free servers, which sly channels do you get with these and do they just last for a day?

lots of them (no although no ppv) ; lines on server 3 last a day, lines on server 4 (more usefull posts required) last 3 days

and pan1100, how do you back up?

I don't know this box: nothing in the manual? normally it's somewhere in the menu (settings, usb, system info, back-up, ...) - mostly you can export this to usb.

[shinoxl]

Re: blade bm7000 need help

how long does the free line last?

[pan1300]

Re: blade bm7000 need help

server 3 lasts 1 day - server 4 lasts 3 days (more usefull posts needed to get access)

[toby69]

Re: blade bm7000 need help

free-servers here pretty good, but servers 2/3 get overload by cheats and traitors posting them to the whole www. no need to do back-ups, i,ve never bothered.
take a sub here for a month and see what you get, if you just want sky, i know good chap!

[pan1300]

Re: blade bm7000 need help

... no need to do back-ups, i,ve never bothered.
...

ok, your point, I take back-ups now and then, and were a few times glad I did - personal choice