SVHD Combo Lan running Spider Box

[deny1912]

Hi everyone Im fairly new to the sat scene and new to this site. Im running a StarView HD Combo/Lan running Spider Box firmware. I see there a free CClines on this forum but have know idea what to do with them. From start to finish to get it working.

Can someone either PM me or post a step by step guide sorry to be a newbie I suppose we all have to start somewhere.

Thanks Guys

[pjmuk]

Re: SVHD Combo Lan running Spider Box

Hi Deny,

Can you tell me, using the remote control, can you go to Accessory--->Network--->Type--->Server Setup?

[pan1300]

Re: SVHD Combo Lan running Spider Box

hi

I don't have a spiderbox, but seems my mvision works +/- the same way.
As pjmuk said: go to menu - accessoires - network settings - setup network (I think best DHCP) - then you must see if you have connection to the network/internet ; then you must enter the cline -> must be also in the setup network where you can enter the cline (first test if it is good). All values of the cline must be entered (except the 'C:' and the 'no { 0:0:3 }')

[toby69]

Re: SVHD Combo Lan running Spider Box

this might help?

If you have a patch loaded, and you want to add a CCcam or newcamd server to your spiderbox..

In the Accessories menu, select Network
the third entry down in the first colum is "Server" select "Server Setup" to the right of that field.
You will see a column with "01.Off" to "10.Off"

Select the field next to 01.Off.

Type gives you the option of CCCAM or NEWCAMD
The entried are almost identical for these setups

Selecting CCCAM
You must have a C-Line given to you by a friend with a server, or one you have created yourelf if you have your own server.

If you have a line like
C: friend.dyndns.org 12000 login password
it may have other parameters beyond password, ignore them
or
C: friend.no-ip.tv 13000 login password { 0:0:2 } etc..

Enter the name "friend.dyndns.org" or "friend.no-ip.tv" into the "Name or IP Address" field.

Enter 12000 or 13000 etc. (it cna have whatever value the server owner sets) into the "Port" field

ID and Password are obvious.

For Newcamd, you must have been given an N-Line which looks like this

N: friend,dyndns.org 11000 login password 01 02 03 04 05 06 07 08 09 10 11 12 13 14

The only difference is that it starts with an "N" which is discarded for our purposes, and the string of numbers 01 - 14 (in this case) which is the DES Key.

enter the sequence given to you by your friend in the DES Key field without spaces.
The example above would look like this
0102030405060708091011121314

To save your CCCAM or NEWCAMD lines, select "Apply" at the bottom of each screen.

That's it.

[deny1912]

Re: SVHD Combo Lan running Spider Box

Thanks everyone im gonna test this out and get back to you all

[deny1912]

Re: SVHD Combo Lan running Spider Box

Ok in my Spider Box menu i go to Acessories, network, the 3rd line down say client i then go to client setup.

Also I think i have newcamb installed. i may need to go back to scratch on all this guys.

Where do I get N lines Ccamb Newcamb files

[vimmers]

Re: SVHD Combo Lan running Spider Box

look in the free cardsharing servers section
there are both free cccamd lines and newcamd lines