Sid not found in PAT?

[green_sat]

Can someone clearly let me know how tp get some of my channels back please. I am getting this 'Sid not found in PAT?' message?
All I need to know which files I have to update?

Many Thanks

[runmo]

Re: Sid not found in PAT?

reboot receiver and should be ok

[green_sat]

Re: Sid not found in PAT?

No that will not fix the issue, I have done some digging an d believe yt the satellite.xml file which needs to have the current frequency.
I believe once you have this then you need to perform a scan. I will try and update accordingly.

[boroboy2020]

Re: Sid not found in PAT?

you can download a new xml file here

http://satellites-xml.eu/

[toby69]

Re: Sid not found in PAT?

i also found with a certain box some time ago that if your box has too many transponder numbers in its memory, when you do scan cannot hold chns as not enough space, i always now try to keep these down to a minimum in my currant box.

[vimmers]

Re: Sid not found in PAT?

i also found with a certain box some time ago that if your box has too many transponder numbers in its memory, when you do scan cannot hold chns as not enough space, i always now try to keep these down to a minimum in my currant box.

indeed a good idea to only have those sats you actually can see with your equipment
as if you have a dish with 2 lnbs
only have 2 satellites in your xml file

[satsearcher]

Re: Sid not found in PAT?

This message means that no channel currently transmits on the SID number stored for that particular frequency. Probably those channels have stopped transmitting or moved transponder.

[vimmers]

Re: Sid not found in PAT?

This message means that no channel currently transmits on the SID number stored for that particular frequency. Probably those channels have stopped transmitting or moved transponder.

yes it can also mean that but mostly are a fail in equipment/software

[pan1300]

Re: Sid not found in PAT?

Mostly indeed local fault (dish, ...). First of all check if this channels and sids are still broadcasting (hope I don't violate the rules, but take a look at eg: l*ngsat, k*ing of s*ts or others). So you have confirmation whether it's a local/personal problem or not.

[rick_o]

Re: Sid not found in PAT?

Can someone clearly let me know how tp get some of my channels back please. I am getting this 'Sid not found in PAT?' message?
All I need to know which files I have to update?

Many Thanks

I had this problem as well ,so i scanned the satellites i wanted manually .then rebooted image and everything was fine.the only thing then is edit channels you don't want using dreamset or dreambox edit

[nml52]

Re: Sid not found in PAT?

sometimes I have found channels replicated on downloadable channel lists. It doesn't seem to happen if you do your own list.

nml

[FunkyB]

Re: Sid not found in PAT?

I had this and tune failed as well. It turns out the tuner was not seated correctly in the dreambox. I purchased new rev m tuner as this tuner is more sensitive tuner.


I would rescan the box and redo channel lists. Check dish lnb is ok and check to see if the tuner is ok in the box. Hope you can get channels back quickly.

[pan1300]

Re: Sid not found in PAT?

Always better to rescan yourselve and don't use another's list ; mostly problems occur, which take more time to solve than to make your own scan and sorting (best with an editor).

[toby69]

Re: Sid not found in PAT?

sometimes I have found channels replicated on downloadable channel lists. It doesn't seem to happen if you do your own list.

nml

channels can get replicated when symbol rates appear 27500 or 27497 on same transponder number.

[pan1300]

Re: Sid not found in PAT?

hi

Didn't know this, thanks.

I only got duplicated channels after using a downloaded channellist, and in a few cases after editing them by pc (but thought this was my mistake).
I experienced when it comes to duplicated channels the best thing you can do is: delete all concerned channels, delete concerned transponders, re-add transponder and rescan.
Trying to change the existing channels and/or transponders wasn't very successful for me.