HH motor problem

[yurad]

Hi, I am a new on setting up motors. I tried to attach motor to my dreambox 800 hd, but when I try to move to an eastern satellite my dish goes to a western satellite.And sometimes when I tried to go to 28 east my dish goes to 19 east.

[tonybod]

Re: HH motor problem

It sounds like the motor or receiver thinks it's in the wrong hemisphere.

[vimmers]

Re: HH motor problem

sounds to me that your settings are already presented in motor settings
have u done the setup yourself
or was the settings already there

found this on another board

setup ur box with motorized dish (diseqc 1.2)

First Go to:

Menu--------->Setup------>service searching--->tuner configuration--->Advanced

then choose any setllite you want example we select Hotbird 13 east

Advanced---->hotbird

LNB--->1

USE USALS----NO

Store --->001

diseqc-----1.2

-----------------------------------
only change these setting pls dont change any other setting then press ok then exit

same you can did other setllites setting but everytime you add other setllite please select LNB2 AND Store :002 and if you add more settllites pls give them LNB3....AND store :3

then go to Positioner Tuner setup

MENU--->-->Setup------>service searching-->Tuner positioner---->Tuner-
-
select setllite Example

Tuner positioner---->Tuner--Hotbird13east

store postion---->1

then move your your dish east by pressing green button when you get Hotbird signal and say locaked just press green button to store setting.then exit

Now search your Hotbird 13east by Manual scan and do the same for other setllites just Change store number 1.2.3.4.5. remember all setllites store with different numbers hope this method will work for you.

[peremacedonia]

Re: HH motor problem

are u done with setup motor or u need more tutorials
here some

[yurad]

Re: HH motor problem

Thank you for your advice. My system is much better now. I set up four satellites but I cannot send my dish to 39 east - hellas yet. When I want to go to 39 east, my dish goes to west and I do not know where is the problem.

[peremacedonia]

Re: HH motor problem

try to set usails position put your long.and latit. position and the motor will go to satelite automatly.Find your coordinates on ****** maps and put in usails
But your antena must be set to true sout.And check lnb is set to maximum reception try to move right- left.

[astr1d]

Re: HH motor problem

And make sure the soft limits are off!

[uttnls]

Re: HH motor problem

Thank you for your advice. My system is much better now. I set up four satellites but I cannot send my dish to 39 east - hellas yet. When I want to go to 39 east, my dish goes to west and I do not know where is the problem.

Indicate your motor model

[notts_alan]

Re: HH motor problem

When using usals if your long or lat is a minus you have to change the e to w or the other way to match the minus long/lat , ? stupid but i have done it myself and had the same as you , going wrong direction,lol

[peremacedonia]

Re: HH motor problem

When using usals if your long or lat is a minus you have to change the e to w or the other way to match the minus long/lat , ? stupid but i have done it myself and had the same as you , going wrong direction,lol

What do u mean minus?