Problemi con smargo

[torinoimperia]

Da alcuni giorni non riesco pił a far funzionare la smargo. Non so cosa sia successo. Non ho modificato nessuna configurazione.

Avviando il comando "dmesg" da telnet appare questo:

control
[ 1677.950000] usb 2-2: CCcam_2.3.0 timed out on ep0in len=0/2
[ 1677.950000] drivers/usb/serial/ftdi_sio.c: ftdi_tiocmget Could not get modem status of device - err: -145
[ 1682.960000] usb 2-2: CCcam_2.3.0 timed out on ep0out len=0/0
[ 1682.960000] drivers/usb/serial/ftdi_sio.c: error from flowcontrol urb
[ 1687.970000] usb 2-2: CCcam_2.3.0 timed out on ep0out len=0/0
[ 1687.970000] drivers/usb/serial/ftdi_sio.c: update_mctrl Error from MODEM_CTRL urb: DTR LOW, RTS LOW
[ 1694.000000] usb 2-2: CCcam_2.3.0 timed out on ep0out len=0/0
[ 1695.000000] usb 2-2: CCcam_2.3.0 timed out on ep0out len=0/0
[ 1695.000000] drivers/usb/serial/ftdi_sio.c: ftdi_set_termios FAILED to set databits/stopbits/parity
[ 1696.010000] usb 2-2: CCcam_2.3.0 timed out on ep0out len=0/0
[ 1696.010000] drivers/usb/serial/ftdi_sio.c: ftdi_set_termios urb failed to set baudrate
[ 1701.020000] usb 2-2: CCcam_2.3.0 timed out on ep0out len=0/0
[ 1701.020000] drivers/usb/serial/ftdi_sio.c: update_mctrl Error from MODEM_CTRL urb: DTR HIGH, RTS HIGH
[ 1706.030000] usb 2-2: CCcam_2.3.0 timed out on ep0out len=0/0
[ 1706.030000] drivers/usb/serial/ftdi_sio.c: urb failed to clear flow control
[ 1711.040000] usb 2-2: CCcam_2.3.0 timed out on ep0out len=0/0
[ 1711.040000] drivers/usb/serial/ftdi_sio.c: update_mctrl Error from MODEM_CTRL urb: DTR HIGH, RTS HIGH
[ 1712.050000] usb 2-2: CCcam_2.3.0 timed out on ep0out len=0/0
[ 1712.050000] drivers/usb/serial/ftdi_sio.c: ftdi_set_termios FAILED to set databits/stopbits/parity
[ 1713.060000] usb 2-2: CCcam_2.3.0 timed out on ep0out len=0/0

Cosa posso fare?

[satman72]

Re: Problemi con smargo

Da quel che leggo pare un problema di comunicazione tra lo smargo e la porta usb, prova a cambiare porta usb e reinstalla la cc*am. Ultima ipotesi, smargo ko...