Latest Patch For Technomate All Models

[brandonlee]

Patch For Technomate All Models


New Phantompatch 111p for TM - 5402 HD -27-05-2011

1-7days EPG (28e UK)
a- turn on a stb
b- move to 11778 on Astra2
c- wait for a minute
d- move to other channels
=========================
2-DD+ no sound
3-Canalsat updating
4-TNTsat updating
5-BisTV updating
6-Neotion CAM updating
_http://hotfile.com/dl/119147300/4239b5d/...1.stb.html

[5zorionak5]

Re: Latest Patch For Technomate All Models

New Phantompatch for TM - 7100/7102 HD Series -27-05-2011

1-7days EPG (28e UK)
a- turn on a stb
b- move to 11778 on Astra2
c- wait for a minute
d- move to other channels
=========================
2-DD+ no sound
3-Canalsat updating
4-TNTsat updating
5-BisTV updating
6-Neotion CAM updating

_http://hotfile.com/dl/119148119/2338169/Phantompatch-TM7100HD_141p-27-05-2011.stb.html
_http://hotfile.com/dl/119148194/488d0e1/Phantompatch-TM7102HDT2_111p-27-05-2011.stb.html

[5zorionak5]

Re: Latest Patch For Technomate All Models

New Phantompatch 741p for TM-6000 SUPER Series -27-05-2011

1-7days EPG (28e UK)
a- turn on a stb
b- move to 11778 on Astra2
c- wait for a minute
d- move to other channels
=========================
2-DD+ no sound
3-Canalsat updating
4-TNTsat updating
5-BisTV updating
6-Neotion CAM updating

_http://hotfile.com/dl/119147911/260c6d1/Phantompatch-TM6800HDSuper_741p-27-05-2011.stb.html

[hayalet18]

Latest_Patch_For_6000_HD_Super_Series

1-7days EPG (28e UK)
a- turn on a stb
b- move to 11778 on Astra2
c- wait for a minute
d- move to other channels
=========================
2-DD+ no sound
3-Canalsat updating
4-TNTsat updating
5-BisTV updating
6-Neotion CAM updating

_http://www.multiupload.com/FDWYMIWWOE

[odysseas1991]

Re: Latest Patch For Technomate All Models

TM800HD new patch with the following fixes and instructions:

Warning
Please Read before downloading this image if you want to be happy with total performance.

we teased and followed bellow instruction no problem at all

How to download by USB ONLY to TM-800 HD
1-Save tm-800 image in USB do not use inside folder re name like this >>> TM800_update.bin
2-Turn on from rear
3-As soon as you see starting press stand by button many times see mini root and wait
4-Wait until you See box ip in the front panel scrolling then press menu button .
it will take about 2 minutes to download about 60MB see success then take USB out. wait for re boot
==============================
5-Do full factory reset .
3-Fallow wizard and download default channel list {if hard disk or wifi leave it for after ignore at this moment }
4-Turn off from rear for one minute
5-Test all functions test all channels motor as many functions as you can when test completed 100% fully satisfied
6-Use only external USB hard disk{or seagate 2.5 inch up to 500gb tested ok }press on USB button to find hard disk and format it
7-use wifi setting {optional } .
8-If above has problem Download 14-06-2011 again by USB ..may be image was not downloaded properly or was corrupted.,
9-After full installation if you are happy no problems then you add anything from outside blue panel but do it one at
the time if problem repeat USB download again.
=================
This image has been tested by fallowing above instructions with success and No green screen or hung-up
picture-sound has been perfect in HD and Sd channels
======================
In this image 14-06-2011

Fixed >>>Fixed >>>>Fixed >>>>Fixed >>>Fixed

1-Multimedia with limited functions
2-channel change speed increased by about 50% very fast
3-navigating menus speed increased very fast
4-distance access control{openport setup }
you can setup and control tm-800 from anywhere
go to system open port {no need to use modem or pc }
access from mobile phone/Etc.
6-Total performance has been tested very fast
7-This image is totally different>> too many changes in core/ and application has to be done
for multimedia to be fixed properly
8-internal hard disk sata tested and working 100% perfect with Seagate 500GB
if you want to use other brand test first if fail use usb adopter for internal use,
9-Few external usb hard disk tested no problems

===========================
Multimedia with limited functions
1-Mp3:Play/stop
===========
Movie files
1-Play/Puse/stop {No trick mode or jump files }
2-No muti audio sub titles
-------------------------
No Support for
1-ITU H264-MPEG4-AVC{PORT10}Video code
2-DTS Audio code
3-More than 2 video code
--------------------------------------
Support as bellow fully tested ok

1- File Format avi OK
2- mkv OK
3- mp4 OK
4- VOB OK
5- Video Codes XVID MPEG-4 OK
6- XVID MPEG-4 Version4 OK
7- DIVX MPEG-4 OK
8- DIVX MPEG-4 Version4(DX50) OK
9- DIVX MPEG-4 Version4 OK
10- DIV3 MS MPEG-4 Version3 OK
11- mp4v MPEG-4 OK
12- MP4.3 MS MPEG-4 OK
13- MPEG Version2 OK
14- X264-MPEG4 AVC(part 10) OK
15- H264-MPEG4 AVC(part 10) OK
-------------------------------------------------------
16- ITU H264-MPEG4 AVC(part 10) Fail
17- Audio Codec DTS Audio(dts) Fail
-----------------------------------------------------------
18- MPEG AAC Audio (mp4a) OK
19- A52 Audio(aka AC3) (a52) OK
20- MPEG Audio layer 1/2/3 OK
================================================== =



The link is __http://download.for-better.biz/bbs/upload/tm800hd/TM-800%20iQ%20HD.rar

[digicon]

Re: Latest Patch For Technomate All Models

Here is the Main site for all technomate Models with all latest patches,Skins,Addons.....etc you will not have to look anywhere else

the Link is _http://www.technomatesoftware.co.uk/

[popssad]

Re: Latest Patch For Technomate All Models

Latest TM patch is a 112 phantom only addition is streaming from laptop .

[Eiko]

Re: Latest Patch For Technomate All Models

Phantompatch-TM5400CI_5600CI_M2


Fixed
39-est antena
Phantompatch-TM5400CI_5600CI_M2_153p

http://www.multiupload.com/38HPUC5A2Q

[Eiko]

Re: Latest Patch For Technomate All Models

Technomate TM Softcam Keys By Glenn_911
Glenn_911TM Softcam All / 25.10.2011