Welcome!

Welcome to Satlover forums, full of great people, ideas and excitement.

Please register if you would like to take part. link..

Register Now

Alert: Don't Use Hotmail Email Accounts for registration

Collapse

Before Access to all Forums and Trial accounts you must need to activate your account Email address

XCRUISER HD / Update

Collapse
This is a sticky topic.
X
X
 
  • Time
  • Show
Clear All
new posts
  • imiimi
    Senior Member
    • Nov 2010
    • 106

    XCRUISER HD / Update


    Place of Origin: South Korea Brand
    Name: Xcruiser
    Model Number: XDSR 400HD
    FTA(Free To Air): Yes
    Type: Digital High Definition: Yes
    Multi PVR: FTP or HDD or USB
    PIP (Picture in Picture): Multi Picture 12

    Specifications High Definition 1080i
    Record in HDD or FTP
    Harddisk Support Upto 1Tb (1000 GB)
    Wireless USB Adaptor Supported
    USB Update
    Tuner & Channel Decoder

    Input Connector F-Type IEC 169-24,Female
    Loop Through out F-Type IEC 169-24,Female
    Frequency Range 950MHz~2150MHz
    Input Impedence 75ohms,unbalanced
    Signal Level 65 to -25dm.
    2KHz Tone (22+2) Khz, (0.6+0.2)V
    DiSEqC Control V1.0/1.2/USALS Compatible
    Demodulation QPSK/8PSK
    Input System Rate 1~45Ms/s (QPSK of DVB-S) 1~45 Ms/s (QPSK of DVB-S2)
    FEC Decoder 1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9, and 9/10 (DVB-S2)

    MEPEG Transport Stream A/V Decoding

    Transport Stream H.264 (MPEG-4 part 10, MPEG-4/AVC and H26L)
    Profile Level MPEG-II ISO/IEC 13818-2/11172-2 MPEG-4/AVC MP@L4, MPEG-II MP@HL
    Input Rte Max 15Mbit/s
    Video Formats 4:3 Letter Box, 4:3 PanScan 16:9
    Video Resolution 720 x 576i, 720 x 576p, 720 x 480i, 720 x 480p, 1280 x 720p, 1920 x 1080i
    Audio Decoding Dolby Digital, MPEG-1 Layer 1,2 and 3
    Audio Mode Stereo / Joint Stereo / Mono Dolby Digital bitstream
    Sampling Rate 32KHz, 44.1KHz and 48KHz (According to Input )

    MAIN SYSTEM

    Main Processor STi Chipset
    Memory Flash-ROM:32Mbytes SD
    RAM:192Mbytes EEPROM: 128Mbytes

    Audio / Video & Data IN/OUT

    RCA CVBS Video Output, Audio L,R Output
    Component Ypbpr Video Output
    HDMI Video & Audio Output
    OPTIC Dolby Digital (SPDIF)
    RS-232 9 pin D-SB (Male)Type Transfer rate 115kbps
    USB USB 2.0 Host Support.(5V DC 500 mA Max)
    Ethernet RJ45 Connector 100Mbps

    Front Panel

    Slot 2 Common interface PCMCIA Slot
    Display VFD (Vacuum Flourescent Display) -8Digits
    Button 3 Button (Standby, CH UP / CH DOWN
    Power Supply

    Input Voltage AC 100~250V, 50/60Hz
    Type SMPS
    Power Consuption MAX.30W
    Protection Separate Internal Fuse & Lighting Protection

    Physical Specification

    Size (W x H x D) 300mm X 60mm X 230mm
    Weight (Net) 1.6 Kg
    Operating Temp 0°C ~+45°C
    Storage Temp - 10°C ~ + 70°C
  • imiimi
    Senior Member
    • Nov 2010
    • 106

    #2
    Software Update

    Software Update

    1.08.52 (Menu+8282) Function Removed & Added Const CW in Plugin
    Attached Files

    Comment

    • imiimi
      Senior Member
      • Nov 2010
      • 106

      #3
      Plugin

      New Plugin Added Coconut for Biss Channels

      improved sharing
      Attached Files

      Comment

      • imiimi
        Senior Member
        • Nov 2010
        • 106

        #4
        Re: Xcruiser 400HD

        ABOUT COCONUT:


        New Plugin Added Name "COCONUT" this plugin Is For Biss Channel Like "IRIBTV3" "Idman Azerbycan" "Lider Tv" Etc....


        you can Enter Biss key in COCONUT by Press Menu > Utility > Plugin > COCONUT press Green button to start when its started Press OK button you can see a new window showing default added key you can Modify or you can Add or Delete Etc... to modify key press OK on any key you want to modify if you want to add new Biss key press Red key to add once you add key software will automatically find its Related Channel id Etc.. and open it in case if does not open the Channel you have to Add "TSID" "ONID" "SID" Manual

        to enter SID TSID ONID manual go to Channel which you want to open and press info Button From Remote and Note Down SID TSID & ONID and go to plugin and Start coconut and press OK key and Enter BISS key after that Press Right button from Remote to Jump to SID Panel and Press OK Key again and Enter the "SID" "TSID" & "ONID" once you finish, press OK key and Exit from everything and check your Channel Should work now




        Comment

        • imiimi
          Senior Member
          • Nov 2010
          • 106

          #5
          English User Manual

          Persian Manual
          Attached Files

          Comment

          • imiimi
            Senior Member
            • Nov 2010
            • 106

            #6
            Re: Xcruiser 400HD

            Channel Editor
            Attached Files

            Comment

            • imiimi
              Senior Member
              • Nov 2010
              • 106

              #7
              Re: Xcruiser 400HD

              Key Editor
              Attached Files

              Comment

              • imiimi
                Senior Member
                • Nov 2010
                • 106

                #8
                Re: Xcruiser 400HD

                Loader for upgrade by computer
                Attached Files

                Comment

                • imiimi
                  Senior Member
                  • Nov 2010
                  • 106

                  #9
                  how to Fix Run... problem in English

                  Program for Edit CCcam.cfg and cardclient.conf
                  Attached Files

                  Comment

                  • imiimi
                    Senior Member
                    • Nov 2010
                    • 106

                    #10
                    Re: Xcruiser 400HD

                    Program for FTP connection from computer
                    Attached Files

                    Comment

                    • imiimi
                      Senior Member
                      • Nov 2010
                      • 106

                      #11
                      Re: Xcruiser 400HD

                      Boot Loader 2.23
                      Attached Files

                      Comment

                      • imiimi
                        Senior Member
                        • Nov 2010
                        • 106

                        #12
                        Re: Xcruiser 400HD

                        How to Record in PC
                        in English
                        Attached Files

                        Comment

                        • imiimi
                          Senior Member
                          • Nov 2010
                          • 106

                          #13
                          RS-232 Cable PIN





                          IMPORTANT:

                          be careful about USB if u use bad and low speed flash disks while updating, it will harm device and cause " RUN... " problem.

                          Mater code is 1407

                          also everywhere that see stars " *** " instead of server's name, go on stars and press 1407, then u can see the server's name

                          when HTTP login u need a user name and pass word:

                          User: root

                          password: there isnt password just press enter after root

                          Comment

                          • imiimi
                            Senior Member
                            • Nov 2010
                            • 106

                            #14
                            Re: Xcruiser 400HD

                            How to update plugin
                            in English
                            Attached Files

                            Comment

                            • imiimi
                              Senior Member
                              • Nov 2010
                              • 106

                              #15
                              Re: Xcruiser 400HD

                              how to run CCcam
                              in English
                              Attached Files

                              Comment

                              Working...