Welcome!

Welcome to Satlover forums, full of great people, ideas and excitement.

Please register if you would like to take part. link..

Register Now

Alert: Don't Use Hotmail Email Accounts for registration

Collapse

Before Access to all Forums and Trial accounts you must need to activate your account Email address

Hyro 9000 HDTV Receiver

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • easydigital
    Board Senior Member
    • Nov 2010
    • 289

    Hyro 9000 HDTV Receiver

    Hyro 9000 HDTV Receiver


    The 9000 HDTV model adds PVR (Personal Video Recorder) harddrive functions also via a SATA connector on the rear panel (no opening of the receiver required, just connect and use). Also, a USB connector on the rear panel for USB harddrives and/or memory stick for firmware upgrades. RS232 connector on rear panel also for firmware upgrade via PC.

    MP3, MPEG-1, MPEG-2 via USB/SATA harddrives
    The 9000 HDTV receiver has a media player built in. It allows you to download movies and audio files to your USB/SATA harddrive, connect to the receiver, and watch without any converting or necessary additional codecs. The receiver autodetects the filetype/encoding and plays immediately via your TV (not all encodings are supported).

    Play your movies on your PC
    The receiver does not encrypt the optional USB or SATA harddrive. A traditional FAT32 partition is used, giving you full access to your movies on your USB/SATA harddrive.
    helped use "Thanks"
  • easydigital
    Board Senior Member
    • Nov 2010
    • 289

    #2
    Re: Hyro 9000 HDTV Receiver

    Firmware for use with 9000 HD receiver
    HD Hyro_011800 .rar
    Download
    helped use "Thanks"

    Comment

    • easydigital
      Board Senior Member
      • Nov 2010
      • 289

      #3
      Re: Hyro 9000 HDTV Receiver

      Setup Software USB Memory
      1.Press menu
      2.Go to Multimedia -> USB.
      3.Touch USB.
      4.The USB memory, browse the file containing the software.
      5.Press then the red button to download to the recipient.
      6.Go back to factory reset and press OK.

      If the receiver Showing Booting so download software using the PC computer
      Recipients must be switched off
      a.open programs Cheditor.
      b.Go to File and download the file in the program.
      c.Go to download the database from the PC to the box and press OK.
      d.Set the receiver. display shows the download again.
      e.Go back to factory reset and press OK.
      helped use "Thanks"

      Comment

      • easydigital
        Board Senior Member
        • Nov 2010
        • 289

        #4
        Re: Hyro 9000 HDTV Receiver

        Firmware for use with 9000 HD receiver
        A1_Hyro_9000HD_025202.rar
        helped use "Thanks"

        Comment

        Working...