OPENBOX S9 as server - Help

[samplef]

Hi,
I have an OPENBOX S9 HD and I want to create a server to share my card.
I have also a clarke-tech 3100HD to setup as client.
I have already setup everything and the decoders connected by LAN, but in the client Decoder channels remain codified...
What can I do?
The OPENBOX do not share the card to the client.
I setup the server as:
N: USER USERPWD 12000

The client:
C: 192.168.1.150 12000 USER USERPWD

They are connected (decoders say connection active), but channels of client do not work

Please, someone could help me
Thanks

[KVF1966]

Re: OPENBOX S9 as server - Help

Openbox S9 need to install and configure the server + client software - NewCS + MgCamd or OsCam + Mgcamd, depends on the card, the receiver clarke-tech 3100HD put client software or MgCamd OsCam. And accordingly, both the receiver must be connected to the same local network and make settings.

[f1fan]

Re: OPENBOX S9 as server - Help

The OPENBOX do not share the card to the client.
I setup the server as:
N: USER USERPWD 12000

The client:
C: 192.168.1.150 12000 USER USERPWD

They are connected (decoders say connection active), but channels of client do not work

Please, someone could help me
Thanks

I'm assuming you are trying to share using CCCam? If you are you have your letters wrong!

The Openbox server should have a 'friend' line to share, e.g.

F: USER USERPWD

The Clarke client then needs a 'connection' line e.g.

C: 192.168.1.150 12000 USER USERPWD