Openbox S11 cfg.file

[ocram88]

Re: Openbox S11 cfg.file

I entered a cline and the decoder will reboot continuously. How can I avoid rebooting while maintaining active cline?

[DirtyDonki]

Re: Openbox S11 cfg.file

1. Use Crimson Editor to edit cfg file
2. Make sure sealion is input correctly
3. Use OB FTP "STBHD_LAN_MM" tool to upload

Login is the box IP Address. Password should be 0000 unless you changed the default menu password. If you changed it then it will be that one that you need to use.

[ocram88]

Re: Openbox S11 cfg.file

The cline that give problems are only those where the username has the symbol "_". Is there a way to avoid writing "_" maintaining the proper functioning of the cline?

[DirtyDonki]

Re: Openbox S11 cfg.file

That's interesting because SL Sealions use _ and they work OK on my box so they should work on yours too.

Maybe your cfg file has picked up some format attributes that linux does not like?

May be worth starting again with a completely new file.

[cannydo]

Re: Openbox S11 cfg.file

Ocram88 I had the same problem with the free lines in here go back and put the line in the usb way. Rather than give up on it I went back to the usb method and it worked.

[ocram88]

Re: Openbox S11 cfg.file

Yes, I solved the problem by inserting a new file. Cfg and if I put the cline in a USB magically work

[microchick]

Re: Openbox S11 cfg.file

Although You can activate 7 Clines and 7 Nlines at the same time in a Skybox or openbox, make a total of 14 lines. If you avoide activating too many different lines for the same network. This trick works for me and makes the box run smoothly. Sorry if someone else has said this before

[mahrkpat]

Re: Openbox S11 cfg.file

I installed the program STBHD_LAN_MM. If I click on login after 20 seconds I get the message 'Can not connect'. How can I connect the decoder? The parameter BOX ip is right, I put the password 0000. How do I know if it's right?

On your openbox go to network menu and find out what the ip of your box is
then when you run STBHD_LAN_MM in BOX IP enter the ip of your box, the latest firmware I think assigns different ip address and not the default 192.168.0.3 I hope this helps.

This a much easier method to load test clines as they are automatically selected and you only have to reboot.

[i.jaybay]

Re: Openbox S11 cfg.file

Although You can activate 7 Clines and 7 Nlines at the same time in a Skybox or openbox, make a total of 14 lines. If you avoide activating too many different lines for the same network. This trick works for me and makes the box run smoothly. Sorry if someone else has said this before

can you explain in more detail how this is done exactly?

thanks.

[microchick]

Re: Openbox S11 cfg.file

can you explain in more detail how this is done exactly?

thanks.

Here is the answer.
1) Get a line from satlover server ( whichever you have access to)
2) copy the line into a notepad file on your computer with a cfg extension.
3) Save the file with the name CCcam.cfg
4) Copy the file to a usb stick
5) Insert the USB into your box
6) After you see the message (USB device has detected) Press menue
7) Menu>Network Setup>CCcam Clinet Setup>Update Files By USB>1 CCcam.cfg>
You will get a message ( New Accounts found)
8) Go down to " Manage Config Files", Select 1:CCcam.cfg and Press OK
You will see the line you have just uploaded
9) Put the Cursor on that line with up down key on remote.
10) Press Green, It will put a check sign in front of that line
11) Go out of the menu and restart the box.
12) After restarting go to a scrambled channel and wait for few moment ( smetime a minute or two) and the channel will open.

Feel Free to Ask any question about this procedure.