Openbox S11 cfg.file

[cannydo]

I have tried varies cfg files but cannot get them on the box. I have even had a go manually host name is accepted port number is as well. The user is not though personally I think its the dash inbetween the symbols that is not recognised. Satlover cfg file by the way this is a brand new box and all I can watch at the moment is freeview. I did notice that other server cfg files can be entered manually no problem but I would rather have a satlover premium.

[mrfarnhigh]

Re: Openbox S11 cfg.file

I cannot say I understood what you are talking about, but I can guess, are you trying to save a "C: line" to a file?
If so, 1. Open your notepad
2. Copy the line you want
3. save as
4. right next to save as type click and choose *.*
5. type name file > CCcam.cfg

that's it
now put that file on USB and load it on your openbox

[cannydo]

Re: Openbox S11 cfg.file

I have tryed usb and it is not working I know because I tryed the cfg files on my spiderbox 1st and they entered but will not on the openbox. So I am trying to put a satlover cccam on manually it accepts all information except the username ie(2FD4SDR_WNF45VN) the box will not accept the dash inbetween the symbols. It is definately the dash that is at fault. I have tryed several new cfg files still not any good I think I might have to buy my cline elsewhere one without a dash if there is no solution to this. Curious does any Openbox users have satlover lines in their box??

[mrfarnhigh]

Re: Openbox S11 cfg.file

If I try to make it manually the dash isn't working for me too. But when I load it from the usb file everything works fine just the server isn't disconnection every 10 minutes or even less, so it's anyway unwatchable from the free satlover

[cannydo]

Re: Openbox S11 cfg.file

Thanks for trying mrfarnhigh I will go back to try usb method again. I was going to buy premier account out of here but if I cant get the lines on there would be no point.

[mrfarnhigh]

Re: Openbox S11 cfg.file

also if that won't help try other firmware

[cannydo]

Re: Openbox S11 cfg.file

I have been back with the usb still will not accept the line. Which firmware would you suggest then mrfarnhigh?? I am just away to try servers from another site.

[cannydo]

Re: Openbox S11 cfg.file

I have since moved on and bought a line quite cheap. Thank you just the same I may come back for that software you never know.

[ocram88]

Re: Openbox S11 cfg.file

How can I insert the symbol '-' (dash)?

[cannydo]

Re: Openbox S11 cfg.file

You press "0 or zero" and keep pressing it till the symbol you require appears.

[ocram88]

Re: Openbox S11 cfg.file

Thank you. How many servers can I put? and how do I know which server is running?

[DirtyDonki]

Re: Openbox S11 cfg.file

The Openbox is a bit finiky with sealions.

7 lines is maximum.
To see who is online you go Setup/Network Setup/CCCAM Client Setup/CCCAM.CFG

There you will see your sealion status and it is also where you have to go to activate them if you loaded them newly. Only tells you on or offline. No share details or card info.

It's a cheap box so can't expect too much. LOL

Do your cfg file on PC and use STBHD_LAN_MM to FTP to box. Works best of all for me.

Most stable firmware for originals is Openbox Software(2011-11-17) and you can get it direct from the maker:

_http://www.yojiatech.com/a/Support/Download/2011/1122/182.html

No annoying 0000 required for opening menus either.

Googoyle is your friend.

[ocram88]

Re: Openbox S11 cfg.file

I inserted the first server and it worked perfectly. Now I tried to insert another one, but I said no active, despite having pressed the button to activate it. How do I activate it?

[cannydo]

Re: Openbox S11 cfg.file

Usually have to reboot before the desired effect is registered in the box.

[ocram88]

Re: Openbox S11 cfg.file

I installed the program STBHD_LAN_MM. If I click on login after 20 seconds I get the message 'Can not connect'. How can I connect the decoder? The parameter BOX ip is right, I put the password 0000. How do I know if it's right?