Re: Lastest MultiCAS version is HERE
MultiCAS-v162E-D01B
Azbox Cabo 11/03/2010
MultiCAS-v162E-D01B
Azbox Cabo 11/03/2010
Welcome to Satlover forums, full of great people, ideas and excitement.
Please register if you would like to take part. link..
Alert: Don't Use Hotmail Email Accounts for registration
Before Access to all Forums and Trial accounts you must need to activate your account Email address
MultiCAS -DATE : 2011/05/18 -Version : v1.70 ----------------------------------------------- ADD : Added BISS key (See include new_biss.key and below) - Al Jazeera Channel (Eutelsat W4/7 @ 36°E) ADD : Added Re-Sharing (CCcam via Local Share, see as below) --- How to use Re-Sharing of CCcam share --- Use one CCcam account for more Azboxes with MultiCAS 1. Azbox connected to CCcam server a. Get CCcam account. b. Go to Plug-Ins->OpenXCAS->MultiCAS and smart Card Splitter & CS Menu c. Select Mode as Server and set the sub-menu as follows ; - My IP Address : this is the IP adres of your Azbox. This will be the server IP address in the client. - Port : 3000 (default value) - Please set the value between 1000 and 9000. - Time Out : 2.0 sec (default value). If you use more clients this time-out value must be higher. Please keep it below 4.0 seconds. - Save the changed values by pressing RED button on RCU. 2. Client Azbox a. Go to Plug-Ins->OpenXCAS->MultiCAS and Smart Card Splitter & CS Menu b. and select Mode as Client and set the sub-menu as follows ; - Server Domain Name Use : OFF (or ON if you use DNS.) - Server IP Address : Set the IP address of the Server STB. - Server Domain Name : If the Server Domain Name Use is ON, put the domain name. (if you use local share between Azboxes in your house the Server IP Address will be like 192.168.***.***) - Port : 3000 (default value) - Please set the same value with that of Server STB. - Time Out : 1.0 sec (default value will 1.0 sec, but 3.0sec will be better) - Check Server : Press OK button for checking the Server STB. If the server information is correct, you will see Server CAS ID : 0x0000. - Save the changed values by pressing RED button on RCU. - Go to TV and check the channel is working well. - If you would have more sets to use Client please follow the above procedure again. - If the TV channel on Client STB is not working please try to adjust the value of Time Out.
Comment