Manual SBox 0.0.4.7 V4 + ROM 180 (Nagra3)

[anacondama]

The first and most recommended is the MAZ 3.0, install the latest version of Sbox, in this case is version 0.4.7 V4

Once installed, sailed up to FTP program:

/ PLUGINS / OpenXCAS / SboxCAS /

Inside you will find:

openxcas.conf
sbox.conf
sbox.sigma
users.sbox


Edit the first and you put this:
[module]
name = SboxCAS
daemon = sbox.sigma /PLUGINS/OpenXCAS/SboxCAS/sbox.conf
version = 0.0.4.7 #2
xcasapi = true
INFO = /tmp/ecm.info
REFRESH = 2

Edit the second (sbox.conf) and you put this:
[main]
server_only=0 # 0=emu+newcamd server 1=only newcamd server
log=0 # 1=no log 1=log to /tmp/sbox.log //ALWAYS USE 0//
userspath= users.sbox # users list
webinterface=1 # 1=web interface on 0=web interface off
webport=81 # web interface port

[slot0]
active=1 # 0=inactive 1=active
sci=/dev/scard # lower
ncdserver=1 # 0=newcamd server off 1=newcamd server on
deskey=0102030405060708091011121314 # newcamd deskey
port=27000 # newcamd port
mhz=318 # Mhz for card in this reader, ONLY WORKS ON INTERNAL CARDREADER

#Nagra2/3 Example
[***xx] # nagra2 camid (4 bytes)
rsa= ******x # rsa "n" from this card (like newcs)
boxkey= ******x # boxkey from this card
emm=0 # 0=accept all 1=block emms 2=block emmu 4=block emmg
#portlist=0 # use portlist or no
#portlistpath=/var/keys/port.list # path from port.list

reboot

there are more settings newcamd etc.

but this is the easier and faster for your card Digital + Nagra3

Re-Shared Post