Tweet
To format your Azbox just follow those steps:
1) format one usb memory in fat32
2) copy on this memory the last firmware ***.bin
3) rename the firmware file in patch.bin
4) switch off your Azbox and insert the usb
5) switch Azbox on a menu will appare, choose format application area and press ok
6) when format is finished choose load firmware from USB
7) wait until Azbox will show you countdown for reboot and pull out the memory from USB.
Now your receiver is totally cleared, you'll need to set up it like when it was switched on for first time also you'll need to load back channels and plugins.
BECAREFULL THIS PROCEDURE WILL ERASE ALL YOU'VE INTO AZBOX
So use it just if you're in troubles.
1) format one usb memory in fat32
2) copy on this memory the last firmware ***.bin
3) rename the firmware file in patch.bin
4) switch off your Azbox and insert the usb
5) switch Azbox on a menu will appare, choose format application area and press ok
6) when format is finished choose load firmware from USB
7) wait until Azbox will show you countdown for reboot and pull out the memory from USB.
Now your receiver is totally cleared, you'll need to set up it like when it was switched on for first time also you'll need to load back channels and plugins.
BECAREFULL THIS PROCEDURE WILL ERASE ALL YOU'VE INTO AZBOX
So use it just if you're in troubles.
Comment