The solution does not detect the HDD in AZBOX PREMIUM HD

[satclub]

So we have AZBOX PREMIUM HD and a burning desire to install inside the HDD. There were two 2,5 "HITACHI 60Gb and SEAGATE 200Gb. Both CDs are tested on IPBox 910 HD. Sets the first HITACHI 60Gb. Receiver it has identified and formatted. But it is not mounted. To write is not available. Install SEAGATE 200Gb. Oil painting: no mounted. SEAGATE 200Gb back IPBox. I start dancing with a tambourine around HITACHI 60Gb. Change format of FAT32, ext2, ext3 results were achieved. To be used, and Partition Magic and Acronis. Editing fstab, did not help. Manually mount does not. Zasada. He went on FTP in the \ DATA. In the telnet command to fdisk-l I see the following:

MMP [~] $ fdisk-l

Disk / dev / hda: 256 MB, 256901120 bytes
16 heads, 32 sectors / track, 980 cylinders
Units = cylinders of 512 * 512 = 262144 bytes

Device Boot Start End Blocks Id System
/ Dev/hda1 1 560 143359 + 83 Linux
/ Dev/hda2 561 624 1638 4 83 Linux
/ Dev/hda3 625 656 8192 83 Linux
/ Dev/hda4 657 980 8294 4 83 Linux

Disk / dev / hdb: 60.0 GB, 60011642880 bytes
255 heads, 63 sectors / track, 7296 cylinders
Units = cylinders of 16065 * 512 = 8,225,280 bytes

Device Boot Start End Blocks Id System
/ Dev/hdb2 * 2 7296 58605088 + 83 Linux

Disk / dev / sda: 1047 MB, 1047265280 bytes
255 heads, 63 sectors / track, 127 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

Device Boot Start End Blocks Id System
/ Dev/sda1 1 128 1022688 + 83 Linux
Partition 1 has different physical / logical endings:
phys = (126, 254, 63) logical = (127, 82, 19)
How so hdb2, why. "
Akronisom I go and see that there is unpartitioned space at 7 meters. And the marked-up in 55 meters. Yeah.
Deletes all. Everything is marked. I get one area the size of 59,7 Gb.
formatting to ext3. Connects to AZBOX and now she dolgolzhdannaya joy. Now on the Menu button in the recording device is the HDD. Ur. I give the command in telnet.
MMP [~] $ fdisk-l

Disk / dev / hda: 256 MB, 256901120 bytes
16 heads, 32 sectors / track, 980 cylinders
Units = cylinders of 512 * 512 = 262144 bytes

Device Boot Start End Blocks Id System
/ Dev/hda1 1 560 143359 + 83 Linux
/ Dev/hda2 561 624 1638 4 83 Linux
/ Dev/hda3 625 656 8192 83 Linux
/ Dev/hda4 657 980 8294 4 83 Linux

Disk / dev / hdb: 60.0 GB, 60011642880 bytes
255 heads, 63 sectors / track, 7296 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

Device Boot Start End Blocks Id System
/ Dev/hdb1 * 1 7296 58605088 + 83 Linux

Disk / dev / sda: 1047 MB, 1047265280 bytes
255 heads, 63 sectors / track, 127 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

Device Boot Start End Blocks Id System
/ Dev/sda1 1 128 1022688 + 83 Linux
Partition 1 has different physical / logical endings:
phys = (126, 254, 63) logical = (127, 82, 19)
Is mounted hdb1.
Confides how to mount HDD. In the telnet give the mount command


MMP login: root
Password:
MMP [~] $ mount
/ Proc on / proc type proc (rw, nodiratime)
/ Dev/mtdblock5 on / DISK1 type jffs2 (ro, noatime)
devpts on / dev / pts type devpts (rw)
tmpfs on / tmp type tmpfs (rw)
sysfs on / sys type sysfs (rw)
/ Dev/hda1 on / MMP type ext3 (ro, data = ordered)
/ Dev/hda2 on / PLUGINS type ext3 (rw, data = ordered)
/ Dev/hda3 on / DISK2 type ext3 (rw, data = ordered)
/ Dev/hda4 on / Download type ext3 (rw, data = ordered)
/ Dev/hdb1 on / DATA/hdb1 type ext3 (rw, data = ordered)
MMP [~] $
Writable.
So victory. I hope someone will help you my experiences.
Shl. The drive must be formatted precisely eht3. And in any case, do not format the it means the receiver, otherwise the format will change to ehe2 and then, when you try to write, will pop up a message, Fail to Rekord.
ZY2. All of the above, I hope to help you use the problem HDD.