Tweet
This image is modifictaion of the original on the 0.9.4931, and it is in the first place for model types.
The idea is that model type, usng AZBox is since the first time, the essentials for the normal use of it without some knowledge from linux/stb can agree.
Installing these FW, you come: - new skin which, by my opinion, more elegantly from the original ones is; - ch register for most observed satellites for usals DiseqC engine - plugins: liveonsat, livefeeds, tevee4yu, weather report, SudoQ, tuxchess_0.2, colour bars, PassReset - CAMS and camreader:OMISSIS are normally Mbox and Newcs, cofigured actively to work together what means that the only thing which you should do should put your original map in the slot and the image will appear that you can choose CAM, while you '>> |' Button bump, you can get info ECM if you push '>>' button - font 'telesat_Uni4AZ.ttf' - subtitles have better visibility (space is OK) - net becomes on automatic assigning of net frame - DHCP after your first beginning on VFD sedately you will get IP address, the AZBox - activated net services is assigned: SSH, Telnet, FTP - SAMBA activates and sentence right - settings, around plugins and CAMS - Reset to download, After you instal FW and your first beginning, you will get setting menu.
Choose 'television channel', then 'tuner A.DVB-S' and 'aerial setting', go down to the 'Positioner setting - USALS', press OK, and come into your frames USALS.
After you go out from the menu, your USB floor remove, your AZBox oppressive power button below since 5 seconds restart.
Now their AZBox is ready to be used.
Gratitude goes out to the team AZBox4YU: Chemstar - for preloaded plugins iPod - for the idea Roger Rabbit - assistance Mickey - the check of the thief - telesat - more responsible for existance of this ATTENTION FW proof-reading: IF the actualisation with new FW succesful is - get setting menu, in other case - renew pls actualisation!
