Tweet
azbox hd elite how to use cccam?help me all
all mate please tel me . how to use azbox hd elite cccam instal?
i wait respons
i wait respons
-
-
Re: azbox hd elite how to use cccam?help me all
Ok this is the quick way,Make sure you're online ["connected"] for the next step. How? HOME -> Settings -> System Information. If you cannot see “connected”, that is to say an IP address assigned to your AZbox HD, the first thing you can do is to reboot. Then, if you're still not online, check the LAN cable or your wireless settings, your modem/router etc. When you are online, download and install OpenXCAS [press HOME -> Plug-in -> Add plug-inred button] -> and when done reboot!!!
This will allow you to download and install directly into AZbox HD various Emulators/CS SW/”plug-ins”, which will either read or emulate original and pirate smartcards, connect to your peers/servers in terms of Card Sharing [CS] etc.
If you cannot do it, that is because you do not have the links from which to do it, as they do not come included in official FWs. There are different ways of adding them to your AZbox HD Menu:
Support servers, full of “plug-ins”... of all sorts!!!
Now one can quickly and easily (than file-by-file, via FTP, which we will describe later on) download directly into your AZbox HD and automatically install – if one is connected to the net...
Some of these plug-ins or add-ons, sitting on those servers I am now going to describe, have additional files, which are already configured, so you do not have to bother too much...
Countless thanx to enthusiasts who made the huge and consistent effort, in their spare time (studying all this, testing, experimenting, debating, packing them and uploading it all for all of us to use with ease), due solely to their good will and capacity to share. For me, these are the really rich people, capable and willing of giving freely!!!
...almost full plug-ins are awaiting...
Of course, not everything can be in those files. For instance, the private details re. CS (peer or cwshare files), must be edited by each and every one of us, depending on our peer's servers to which we need to connect etc. There is a lot of stuff written on the subject, across many forums, like Satdudez, Sat-Plus, Sat-Universe and so on... for which I am partly to blamed, hehe...
OK, let's get down to the thing itself: there are 2 places where we can edit/add those links, from which one can download all that into one's AZbox HD!
1) Press the HOME button on your remote and go to -> Plug-ins -> red button on your remote [= "add plug-in"] -> edit the links
Here are mine:
2) Press the HOME button on your remote and go to Plug-ins -> OpenXCAS -> Manual install -> edit the links.
www.satelites.info/azbox/ - thanx to BE-COOL
www.azboxhd.no-ip.org - thanx to DJBlu
One can edit them by pressing the blue button. Leave one of the links in each of the two parts as azboxworld.com - the "semi-official" one, as it were....
A note: one gets the sign " / " by pressing the CAPS/NUM on your remote a couple of times, then 1 = / etc. etc. Also, use that button to change between the caps, numbers etc.
Now, you're going to get a whole new world of support for AZbox HD, which will, no doubt, grow and grow... Let me show you just one of them, thanx to our Spanish colleagues
If one hates to use one’s remote, one can edit the links via FTP, in the box itself by pressing the blue button on your remote.
Do not add more than 4 links, as it's useless
MultiCAS Emu and CS!!!
Home -> Plug-ins -> enter OpenXCAS by pressing the OK button on your remote and go to Manual Install option -> http://techsat.info/AZCamd
to -> install MultiCAS “plug-in”-> press OK on your remote, to see whatever's at the link provided -> choose the latest MultiCAS version -> when done, reboot!
A note: there are various “plug-ins”. Some are Emulators, emulating Original Smart Cards [OSC], decrypting encrypted satellite, terrestrial or cable channels, if those encryption systems are hacked and so those cards can be “read” and “emulated”.
One of them is MultiCAS EMU, reading many cards but also opening many channels that are using various hacked CAS [= encryption systems].
Some other “plug-ins” are a mixture of EMU and CS SW [= Card Sharing SW]. We shall come to it later, when we shall speak of, for instance, MGcamd.
Some other “plug-ins” are simply fetching EMU’s the working keys from the net.
MultiCAS is now a CS SW, too!
We can now see a Card Splitter sub-menu, so one can share one's card, in built-in card reader, either inside one's home or outside. Allegedly, it has its own protocol. One must have at least FW 0.9.2880, for it to work.
Home -> Plug-ins -> OpenXCAS -> Camd Setup -> MultiCAS. Then, in Smartcard Interface one finds Smart Card Splitter sub-menu, where one must put in various data, depending on whether one want to be:
-server to another receiver, sharing your card with another
-client and hook onto somebody else's card/server.
In this menu you can put cccam server account then just set last option on enable and press red button to save all.
EnjoyJust click on thanks button if my post has helped you
Don't send me cline requests, technical or premium server questions in PM! I'll not answer!
Comment