Tweet
Morsor Get EPG 2.2 NEW!
2.2 getepg
Attachment 1980Well, here I leave the last version of the plugin to install on any firm from the 4890 (KGD or not).
The main novelty of this version is the use of epg.dat file has been replaced load the EPG function for the creation of epg.dat file you need in principle less memory and is faster, after the creation of frees memory file and then loads the EPG from the file, which is very fast, as a result, memory usage is lower, the upload speed is at least 6 times faster, we have the file generated for subsequent charging a startup script in order not to lose the restart and the info is loaded into the appropriate field allowing more characters.
Some examples approximate speed:
Loading EPG Digital + (140 channels) for 2 days - 45 seconds
Loading EPG Digital + (140 channels) for a week - 1:30 minutes
Loading EPG Sky Italia (530 channels) for a week - 3:30 minutes.
Besides this, there have been some fixes in the xml (for example, has fixed the bug that did not eliminate the previous xml) and any thing else in the field of memory and has been added to getepg the parameter-A EPG convert all charged with capital letters (for those who have vision problems, lol) and the parameter-l for loading epg.dat generated (when getepg launches and loads the files but if you just want to do load without the whole process, this parameter does).
KGD 4890 Installation on firm
1 - Unzip the contents of the zip on your hard disk.
2 - Copy files getepg, and getepg.conf DaemonEPG the epg folder to / plugins / PanelKGD / epg in our Azbox and give permissions 755 to getepg and DaemonEPG
3 - Modify the getepg.conf to everyone's taste
4 - If you have a script in / DISk2/etc/start.d to recharge the old EPG epgdat program, delete it.
5 - Copy the script start.d content of the file folder that have been downloaded and unzipped to / DISk2/etc/start.dy give permissions 755
6 - As I suppose you will have the daemon loaded from the menu of the getepg PanelKGD or you throw through the crond, modify this script last boot and remove the line it says. / DaemonEPG.
Installation on non-firm KGD> 4890
1 - Unzip the contents of the zip on your hard disk.
2 - generate Azbox / PLUGINS a folder called PanelKGD (respecting upper) and within this another call epg
3 - Copy all files in the file epg that have been downloaded and unzipped to / plugins / PanelKGD / epg (to be created before our Azbox) and give permissions 755 to getepg and DaemonEPG
4 - Modify the getepg.conf to everyone's taste
5 - Copy the script start.d content of the file folder that have been downloaded and unzipped to / DISk2/etc/start.dy give permissions 755
6 - Connecting via telnet to Azbox and type:
cd / PLUGINS / PanelKGD / epg
. / DaemonEPG
. / Getepg
The second instruction memory, the daemon starts to load automatically every night and the third loading the epg.
Note: I found that almost always fails in the end when loading the file into memory epg.dat but apparently the EPG is loaded without problems, so do not give him much importance.
Note 2: I modified the tutorial according to these changes.
Version 2.1 changes
- Fixed bug in MediaHighway 1 with the time difference
- Fixed bug with negative offset values in the getepg.conf
- Now add events in MediaHighway 1 retransmissions
- Added support for multiple character sets.
Changes in version 2.2
- Added standard protocol (Supplier Tivusat added in conf)
- Added protocol Nova (using standard protocol but sent by a different pid)
- For those who use MediaHighway 2 (Digital +) a surprise to see who is the first thing is, jejejeje
(Files that change are the getepg.conf getepg and the rest remained even though I placed the last epg.excl epg.equiv and published.)
Attachment 1980Well, here I leave the last version of the plugin to install on any firm from the 4890 (KGD or not).
The main novelty of this version is the use of epg.dat file has been replaced load the EPG function for the creation of epg.dat file you need in principle less memory and is faster, after the creation of frees memory file and then loads the EPG from the file, which is very fast, as a result, memory usage is lower, the upload speed is at least 6 times faster, we have the file generated for subsequent charging a startup script in order not to lose the restart and the info is loaded into the appropriate field allowing more characters.
Some examples approximate speed:
Loading EPG Digital + (140 channels) for 2 days - 45 seconds
Loading EPG Digital + (140 channels) for a week - 1:30 minutes
Loading EPG Sky Italia (530 channels) for a week - 3:30 minutes.
Besides this, there have been some fixes in the xml (for example, has fixed the bug that did not eliminate the previous xml) and any thing else in the field of memory and has been added to getepg the parameter-A EPG convert all charged with capital letters (for those who have vision problems, lol) and the parameter-l for loading epg.dat generated (when getepg launches and loads the files but if you just want to do load without the whole process, this parameter does).
KGD 4890 Installation on firm
1 - Unzip the contents of the zip on your hard disk.
2 - Copy files getepg, and getepg.conf DaemonEPG the epg folder to / plugins / PanelKGD / epg in our Azbox and give permissions 755 to getepg and DaemonEPG
3 - Modify the getepg.conf to everyone's taste
4 - If you have a script in / DISk2/etc/start.d to recharge the old EPG epgdat program, delete it.
5 - Copy the script start.d content of the file folder that have been downloaded and unzipped to / DISk2/etc/start.dy give permissions 755
6 - As I suppose you will have the daemon loaded from the menu of the getepg PanelKGD or you throw through the crond, modify this script last boot and remove the line it says. / DaemonEPG.
Installation on non-firm KGD> 4890
1 - Unzip the contents of the zip on your hard disk.
2 - generate Azbox / PLUGINS a folder called PanelKGD (respecting upper) and within this another call epg
3 - Copy all files in the file epg that have been downloaded and unzipped to / plugins / PanelKGD / epg (to be created before our Azbox) and give permissions 755 to getepg and DaemonEPG
4 - Modify the getepg.conf to everyone's taste
5 - Copy the script start.d content of the file folder that have been downloaded and unzipped to / DISk2/etc/start.dy give permissions 755
6 - Connecting via telnet to Azbox and type:
cd / PLUGINS / PanelKGD / epg
. / DaemonEPG
. / Getepg
The second instruction memory, the daemon starts to load automatically every night and the third loading the epg.
Note: I found that almost always fails in the end when loading the file into memory epg.dat but apparently the EPG is loaded without problems, so do not give him much importance.
Note 2: I modified the tutorial according to these changes.
Version 2.1 changes
- Fixed bug in MediaHighway 1 with the time difference
- Fixed bug with negative offset values in the getepg.conf
- Now add events in MediaHighway 1 retransmissions
- Added support for multiple character sets.
Changes in version 2.2
- Added standard protocol (Supplier Tivusat added in conf)
- Added protocol Nova (using standard protocol but sent by a different pid)
- For those who use MediaHighway 2 (Digital +) a surprise to see who is the first thing is, jejejeje
(Files that change are the getepg.conf getepg and the rest remained even though I placed the last epg.excl epg.equiv and published.)
Comment