LT6-DM8000HD-Images

[aaba]

First update of LT6½ for DM 8000HD


First update of LT6½. We have followed changes in OE 1.6 with new Linux kernel and Enigma2 updates.
Some tiny changes to our LT External EPG is also included.


Openembedded
OE 1.6

Drivers:
dm7025 20101011
dm800,dm8000 20101013
dm500hd 20101015


Secondstage:
dm800,dm8000,dm7025 #76
dm500hd #80

Enigma2:
20101020 Experimental

LT revision:
3433

NOTE 1!
If you have the device connected during boot then it will be mounted by
/etc/fstab and in such case mountpoints below will be used.
This is for your harddisc and if you choose to use LT Link Manager or LT EPG
Cachelink Manager with CF or USB Stick.

Hotplug, devices you insert when Enigma2 is running, is handled by autofs
and all thoose devices are mounted at /autofs and use the devicename from
/dev like /autofs/sda1

dm8000
/dev/hdda1 /media/hdd auto defaults
0 0
/dev/card_sd1 /media/sd auto defaults
0 0
/dev/card_cf1 /media/cf auto defaults
0 0
/dev/card_sm1 /media/sm auto defaults
0 0
/dev/card_ms1 /media/ms auto defaults
0 0
/dev/usb_lower1 /media/usb auto defaults
0 0
/dev/usb_upper1 /media/usb1 auto defaults
0 0
/dev/usb_front1 /media/usb2 auto defaults
0 0
/dev/usb_internal1 /media/usb3 auto defaults
0 0

dm800
/dev/hdda1 /media/hdd auto defaults
0 0
/dev/usb_lower1 /media/usb auto defaults
0 0
/dev/usb_upper1 /media/usb1 auto defaults
0 0

dm500hd
/dev/hdda1 /media/hdd auto defaults
0 0
/dev/usb_internal1 /media/usb auto defaults
0 0
/dev/usb_external1 /media/usb1 auto defaults
0 0

dm7025 (do not use USB on dm7025)
/dev/sda1 /media/hdd auto defaults
0 0
/dev/sdc1 /media/cf auto defaults
0 0


If you rebuild your dm500hd to activate USB we recommend that you add some
kind of over-current protection since otherwise you can destroy your box!
LT Team takes no responsibility for your box if you modify it!!!!


NOTE 2!
Since this is image is based on LT7's code the LT Link Manager controlfile
is not lt6links.cfg anymore it is now lt7links.cfg

Thx LT Team

http://www.lt-forums.org/LT/images/LT.Sixth.and.a.half.1-dm8000.nfi

[mehdi1981]

Re: LT6-DM8000HD-Images

LT6½ OE1.6 SP2 for DM8000HD released - New LT Prologue

This is the Prologue of the New LT image to be released in the very near future. In this image we have followed the Enigma2 Updates and fixes, and we have added support for the new Dreambox DM800se!

We have also done some fixes (minor) about some issues we have been reported.

Openembedded
OE 1.6

Drivers:
dm800/dm8000/dm800se/dm500hd/dm7025 hardware drivers - 20101208

Secondstage:
dm800/dm8000/dm7025 #76
dm500hd/dm800se #80

Enigma2:
20101206 Experimental

Internal LT revision
3448

Enjoy the new image, and feel free to give us feedback for anything you do not like!

Note 1: Since this is image is based on LT7's code the LT Link Manager controlfile
is not lt6links.cfg anymore it is now lt7links.cfg

LT6½ OE1.6 SP2 for DM8000HD released