Welcome!

Welcome to Satlover forums, full of great people, ideas and excitement.

Please register if you would like to take part. link..

Register Now

Alert: Don't Use Hotmail Email Accounts for registration

Collapse

Before Access to all Forums and Trial accounts you must need to activate your account Email address

usb2serial drivers

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • paradiselost
    Senior Member
    • Nov 2011
    • 185
    #1

    usb2serial drivers

    before using dreamup for first time install these drivers in pc and connect dm800se through service port

    usb2serial drivers
    _http://www.4shared.com/file/v4uXXWQe/CP210x_VCP_Win_XP_S2K3_Vista_7.html
    Tags: usb2serial
    • anacondama
      Banned
      • Jul 2010
      • 865
      #2
      Re: usb2serial drivers

      Originally posted by paradiselost
      before using dreamup for first time install these drivers in pc and connect dm800se through service port

      usb2serial drivers
      _http://www.4shared.com/file/v4uXXWQe/CP210x_VCP_Win_XP_S2K3_Vista_7.html
      Thanks pal ... but is it universal ? i mean doest it work with any Usb2Serial adaptor ???

        Comment

        • paradiselost
          Senior Member
          • Nov 2011
          • 185
          #3
          Re: usb2serial drivers

          When Windows 7 is not a problem with drivers but Vista and XP is required. Use the cable that comes bundled with the receiver or any cable mini USB to USB or USB to USB.

          DM800se must be set from menu/setup/network setup to DHCP!

          Connect your 800se with Lan cable and mini usb cable. Windows will try install the new device drivers. If the drivers installation was unsuccessful, then install "Mini USB Windows 2K/XP/Vista/W7 Driver" manually. After successful drivers install you will be reported that new device is example in COM4.

          Power off your 800se.

          Open DreamUp. Tick "With Network" and the "Serial Port" set to COM4 at last fill out the IP settings. And hit the tab "Connect"

          Power the box on and wait till the box is recognized and the "Flash" tab is dark. Next hit the "Flash" tab and look up "image.nfi". If the flash is gonna successfully u get a notice. After that hit tab "Disconnect" and power off the 800se.

          Press and hold from front the 800se Standby button. Power the box on and wait till u have on OLD display message *** STOP *** then release the standby button. Now open internet explorer and write there a IP what u see from 800se OLD display. DO NOT USE FIREFOX! You get new window open and down there is "firmware upgrade" hit that. Now add image what u want flash. Do not tick "Reboot After Flash"! Wait till flash is finish and do not close the page, or hit reboot.

          Open DramUp. Tick "With Network" and the "Serial Port" set to COM4 at last fill out the IP settings. And hit the tab "Connect"

          Now hit from internet explorer flash page "Reboot" and close that.

          800se will now reboot the box is recognized and the DreamUp "Flash" tab is dark. Next hit the "Flash" tab and look up "image.nfi". If the flash is gonna successfully u get a notice. After that hit tab "Disconnect" and power off the 800se.

          Unplug the mini USB and power box up with new image. ''

          The same goes for 800se clone using Sunray Flasher.

            Comment

            Previous template Next
            Working...