Tweet
A little Tut to flash the 800
-Power off the Dreambox.
-Holding down the power button, power up the Dreambox.
- Wait for the message “*** STOP ***“. At this point you can release the power button. Make a note of the IP address displayed.
-Open a web browser and enter the URL “http://ip-address” (where ip-address is the IP address noted in the previous step).
-On the displayed web page, click “firmware upgrade“.
-Select the flash file you want to flash. Note: Make sure the file has an “.nfi” extension.
-Click “FLASH!“
-Reboot
without any warranty
hefty
-Power off the Dreambox.
-Holding down the power button, power up the Dreambox.
- Wait for the message “*** STOP ***“. At this point you can release the power button. Make a note of the IP address displayed.
-Open a web browser and enter the URL “http://ip-address” (where ip-address is the IP address noted in the previous step).
-On the displayed web page, click “firmware upgrade“.
-Select the flash file you want to flash. Note: Make sure the file has an “.nfi” extension.
-Click “FLASH!“
-Reboot
without any warranty
hefty