ss2 dvbdream stopped

[ferro_2004]

hi, i'm new here in the board. SS2 2.8 + dvbdream 1.4f + speed hadu 0.1.2.6, winxp sp2 and avast antivirus . I would like to know why after 5 - 10 seconds of good quality transmission, transmission stop. Where is my error? thanks a lot. ciao p.s. sorry for my english

[enes]

Re: ss2 dvbdream stopped

When You say - stop transmission - did picture freeze or you lost signal? And did you watch free channel or some paid channel? If you want to see are DVB Dream working well, test it with free channels.

Also, why you not install new version - 1.5e?



Cheeers....

[tkyou]

Re: ss2 dvbdream stopped

Try this version of dvbdream v1.5c or e

[zoran89]

Re: ss2 dvbdream stopped

First it work OK couple of seconds but then you need new key, so it is problem of slow server.

And @tkyou first this is live link, second this is 1.5 version witch is not free, and this file have crack in folder.

[ferro_2004]

Re: ss2 dvbdream stopped

When You say - stop transmission - did picture freeze or you lost signal? And did you watch free channel or some paid channel? If you want to see are DVB Dream working well, test it with free channels.

Also, why you not install new version - 1.5e?



Cheeers....

THANX... tkyou enes zoran89,
well, it's like a lost signal; with fta channels and HADU activated, it work's very well; very well also fta channels with vplug 2.4.6 activate.

@ zoran 89 ... i try to configure hadu ini like i've carefully read in some posts here... but it seems there isn't a problem like mine

[zoran89]

Re: ss2 dvbdream stopped

Problem is because you probably use Server3 and Server3 is very slow server because many peoples connect on him.

You say with hadu and vplug FTA channels work well, but HADU and vplug dont work at all with FTA channels. You can watch FTA channels evan withouth HADU or vplug.

You realy cant do anything untill you change to the faster server.

[ferro_2004]

Re: ss2 dvbdream stopped

tx
{ 0:0:3 } is it necessary?

[EUROASTRA]

Re: ss2 dvbdream stopped

tx
{ 0:0:3 } is it necessary?

Use:
Optional parameters :
MaxHop= ; [0=None], or 1-N

[ferro_2004]

Re: ss2 dvbdream stopped

it seems to work 10 sec until suddenly it miss the right sequence

[zoran89]

Re: ss2 dvbdream stopped

There realy is no help until you find better server.

[makadam]

Re: ss2 dvbdream stopped

sometimes there is a conflict between vplug and hadu because of the ccw key sent to the dvbplayer and it's freez after the first key

[msd79m]

Re: ss2 dvbdream stopped

I have been using DVBDream v1.4i with vplug and hadu on my SS2 card for a long time without any problem.
Since you have picture for a few seconds, I think your hadu config file is fine and I am almost sure that your problem is either the server or your internet connection.
Please open the monitor dialog of hadu (plugins > hadu > monitor) and let us know the status of your connected server when your picture freezes. Is it switching among connecting, logging, etc? can it get the key from the server?

[msd79m]

Re: ss2 dvbdream stopped

DVBDream 1.4i is the last one free version, and it have a problem with SkyStar HD2 PCI card, (HD version), and this is the diseqC, with SS2 HD2 diseqC doesn't work. You can only use one dish, and no more. But with DVBDream v1.5e this problem has been fixed. So I prefer DD 1.5e instead DD 1.4i.

And another problem to freeze or stop SS2 may be your DSL connection. If this connection is WIFI, is possible to get more freeze o stops than a wired conection from router to pc.

Regards.

I didn't get your point! AS I said, I don't have any problem with my setup and I just wanted to help ferro.

[msd79m]

Re: ss2 dvbdream stopped

So do I, I only explained my experience if someone have had the same problem as me.
Anyway apologizes, excuse me if I mistaked.
Regards.

Ah... since you had quoted my post, I thought I couldn't tell my point properly.
Sorry mate