Software for listing signal levels

[Gadjan]

Is there any tool, or dvb player (for skystar 2) I can use to automatically check all transponders and list signal levels. Then I would copy-paste if possible or print screen... whatever. I need to store it, so I can compare with my friend, or later with different dish/lnb adjustment. I really need this 'cause checking and writing manually is very time consumptive .

I'm doing this because I want to check and compare signals with dish mounted directly on the pole and with polar mount I use (mechanical, without motor).

[laaziri1963]

Re: Software for listing signal levels

Progfinder 32 bits

__http://download.progdvb.com/psf/ProgFinderSetup2.34x86.exe

Progfinder 64 bits

__http://download.progdvb.com/psf/ProgFinderSetup2.34x64.exe

[Gadjan]

Re: Software for listing signal levels

It's not exactly what I'm looking for, but it's step forward. It is easier and quicker to switch frequencies then with altdvb. Just up/down arrow keys, like fastsatfider (which ironically isn't fast at all extremely slow tuning on my skystar 2.6d so I didn't use it).

I'm still looking for something to show all frequencies and corresponding signal levels (if there is such thing). So I could compare it with my best setup at any time in the future (when I suspect dish alignment, my neighbor's tree branches... ).

Btw, how this looks? I know it depends on lot of things primarily location, but is it ok to have some frequencies above 80 and some below 50? I tried fine tuning elevation and lnb skew but it's best i could (115cm offset dish).

19.2E

10744 H 82%
10758 V 46%
10788 V 50%
10847 V 50%
10862 H 86%
10876 V 47%
10921 H 84%
10979 V 59%
11023 H 80%
11038 V 62%
11068 V 59%
11097 V 65%
11156 V 73%
11186 V 65%
11244 H 87%
11318 V 72%
11421 H 82%
11479 V 78%
11509 V 72%
11523 H 76%
11538 V 71%
11568 V 72%
11597 V 69%
11612 H 82%
11686 V 57%
11720 H 73%
11739 V 68%
11758 H 72%
11778 V 66%
11798 H 63%
11836 H 50%
11856 V 69%
11895 V 71%
11934 V 68%
11954 H 66%
11973 V 68%
12032 H 62%
12051 V 62%
12070 H 47%
12110 H 66%
12148 H 40%
12188 H 77%
12226 H 80%
12266 H 76%
12285 V 76%
12324 V 74%
12363 V 76%
12402 V 72%
12422 H 72%
12460 H 75%
12480 V 75%
12515 H 74%
12522 V 65%
12545 H 79%
12552 V 65%
12581 V 73%
12604 H 78%
12610 V 68%
12633 H 67%
12640 V 73%
12663 H 74%
12692 H 72%
12699 V 72%
12728 V 62%

[aplok]

Re: Software for listing signal levels

... dvb player (for skystar 2) ...
... all transponders and list signal levels.... I want to check and compare signals with dish mounted ...

hello,

is your skystar 2

linux driven ? enigma 1 ? enigma 2 ?

[Gadjan]

Re: Software for listing signal levels

No, Windows XP, WDM drivers...

[kasper17]

Re: Software for listing signal levels

Hi there

Well I think crazyscan will do the job
Good Luck

[Gadjan]

Re: Software for listing signal levels

_http://sourceforge.net/p/crazyscan/wiki/Info/

It doesn't support my cards (I have old SkyStar 2.6D and HD2). But I tried it anyway, and it does not work (crazyscan.exe - entry point not found, the procedure entry point RFScan could not be located in streamreader.dll ...).

[aplok]

Re: Software for listing signal levels

It doesn't support my ... .

you can try other scanner

catalog here

__http://www.*******.com/watch?v=we6y-aTebxQ