Parameters in cccam ?

[bigly]

Hi ,

if anybody tells me about parameters in cccam line specially this in end of line {0.0.3}

{0.0.3} ----> what means ?

[enes]

Re: Parameters in cccam ?

Correct me if I wrong, but this should limit you to connecting on cards more than 3 hops...

My bad english can be confused, so, if you connect on some CCCam server, you can "use" cards on that server, and servers connected on it (second servers), and another servers (cards) connected on all that servers (third servers).

[peremacedonia]

Re: Parameters in cccam ?

With one word to recive cards to hop 3

[pcca-matrix]

Re: Parameters in cccam ?

I do not know exactly , but i thing this is used to set the maximum hop

for selecting wich card user can have access or something like that.

more info be can be usefull

[enes]

Re: Parameters in cccam ?

Someone can try it.... {0.0.3} replace with {0.0.2} and see does number of available cards was less then before. I cannot test myself.....

[jonny2by4]

Re: Parameters in cccam ?

What is Hop, reshare & distance ?

Hop, Reshare & Distance are 3 same terminology's in a way!!

Hop is used in CCcam and Distance is used in other emus like Gbox & others

''So what do they mean ?''

Hop means number of servers away !!

In simple terms to understand me well here is an example!!

Quote:
I have a local card and i am sharing with you!!

You will see my card as Hop 1 or as called elsewhere Distance 1

Now you decide to share with your friend

Your friend will get my card as Hop 2 ( this is called Reshare , because you are resharing my card with your friend )

One day your friend decides to share with his father, so his father will get my card as Hop 3

and the further the card goes with each connection it will add 1 hop each time
Now you are thinking and deep inside you are saying '' But i do not want to reshare my card so many times''

Well you are right it is never suggested to reshare your card more than 3 times this means 3 hops away !!

In order to eliminate this you need to add some config in your F: lines in Ccam.cfg, this will be covered in another Faq !!

[enes]

Re: Parameters in cccam ?

OK. So, {0.0.3} on end of cccam line is max. 3 hops or not?

[jonny2by4]

Re: Parameters in cccam ?

like i said it is never suggested to reshare your card more than 3 times so you could say it is the max.

[pcca-matrix]

Re: Parameters in cccam ?

thanks for info jonny2by4.

i read somewhere you can use additional setting for selecting only one provider on a specific card ? is this correct ?

"isolate" only one provider can speed zapping between channel ?

[enes]

Re: Parameters in cccam ?

like i said it is never suggested to reshare your card more than 3 times so you could say it is the max.

So, if I enter {0.0.2} I not "see" cards on hop 3? And, correct me if I wrong - I cannot decide does I can reshare your cards. Owner of server can add you this options, and how many hops you can reshare?

[peremacedonia]

Re: Parameters in cccam ?

So, if I enter {0.0.2} I not "see" cards on hop 3? And, correct me if I wrong - I cannot decide does I can reshare your cards. Owner of server can add you this options, and how many hops you can reshare?

Owner can give u reshare right or not. or how many times to reshare card,but u can decide if u want to reshare that card

[uttnls]

Re: Parameters in cccam ?

Owner can give u reshare right or not. or how many times to reshare card,but u can decide if u want to reshare that card

Peremacedonia means you "cant decide", only the owner gives you the right to reshare and how many hops to do it.

And of course, if you have sufficient rights to reshare, then you can decide if you want to or not using an F line

Things are a little confusing :

In C line { 0:0:3 } means upto hop3

In F line { 0:0:3 } means maximum three hops reshare

I think this is confusing for all newbies

[enes]

Re: Parameters in cccam ?

OK.... I think now we know this And now, we know what is {0:0:3} on the end of C line (and F line). So, if we don't want to use cards on hop3, we can change this to {0:0:2}....

[jochen7575]

Re: Parameters in cccam ?

How can you store them in the line?

I use the satlover modifyed acamd plugin and i can't see where i can write the { 0:0:3 }

[uttnls]

Re: Parameters in cccam ?

How can you store them in the line?

I use the satlover modifyed acamd plugin and i can't see where i can write the { 0:0:3 }

The talking is about CCcam my friend, read the title !