Latest ACamd

[batna74]

Acamd 6.2.0

History
-------
31.12.2010
V 0.6.2.0 <- V 0.6.1.8
- Added Anysee support
- Added FTDI support (smargo)
- Added SoftCsa mode
- Changed When disable PMT or CAT scan, disable cache scan to
- Fixed PMT, missing some HD entries
- Fixed lot of small issues, CCcamN, EMM
- Removed Emubox03, GBoxN, MBoxN
- Same MDAPIFilter.ax v0.0.0.6
- Update ACamdMonitor.exe v0.0.0.3

[krimozak]

Latest ACamd

ACamd V 0.6.2.0
[B]
What's new at 31.12.2010 :

V 0.6.2.0

- Added Anysee support
- Added FTDI support (smargo)
- Added SoftCsa mode
- Changed When disable PMT or CAT scan, disable cache scan to
- Fixed PMT, missing some HD entries
- Fixed lot of small issues, CCcamN, EMM
- Removed Emubox03, GBoxN, MBoxN
- Same MDAPIFilter.ax v0.0.0.6
- Update ACamdMonitor.exe v0.0.0.3

[os2222]

Re: The new version of ACamd V 0.6.2.0

hi could you tell me what settings you use. i often have freezes and i think its because of my settings

[ACamd]
ShowMonitor=1
DecryptAll=1
DCWTweak=1
ReadPmtFile=1
DisplayFilterActions=1
Com1=0
SplitECM=0
AutoSearch=1
ReadCAT=1
Only184=0
MultiEcm=1
ReadPMT=1
DeleteUnusedEcm=1
LockOnConnectionId=1
Active=1
DisKeyDelay=1
DisplayCCcamNShare=0
DisplayChameleon2Share=0
DisableClientOnBadConnection=0

[cristi68p]

Re: The new version of ACamd V 0.6.2.0

hi could you tell me what settings you use. i often have freezes and i think its because of my settings

Yes,I am interested too for the best settings of ACamd,because standard setting give me freezing,no matter if it is an HD program or not.
Thanks in advance to more experimented users for an answer.

[pauloxx81]

Re: Latest ACamd

here is my config and i dont have freeaz.
[ACamd]
ReadPMT=1
ReadPmtFile=1
DCWTweak=1
Active=1
MultiEcm=1
TrayIcon=1
UseChCacheIni=0
AutoSearch=1
ShowMonitor=0
DeleteUnusedEcm=1
LockOnConnectionId=1
Only184=0
DisplayCCcamNShare=0
FilterSeca3=0
DecryptAll=0
SplitECM=0
UseCHIDCacheIni=0
FilterSeca2=0
DisableClientOnBadConnection=1
DisplayFilterActions=0
DisableMonitorOutput=0
Com2=0
DisKeyDelay=0
ReadCAT=1
Com5=0
Com5_Mode=5
Com5_6mhz=0
Com5_9600=0
DisableEcmCache=0
DisableEmmCache=0
DisableDCWCache=0
Com2_Mode=6
Com3=1
Com3_Mode=4
Com3_Emm=0
Com4_Mode=5
ANYSEE0=0
ANYSEE3=0

[betfair39]

Re: Latest ACamd

i have a question sorry if its sounds out of topic.
cccam in dreambox faster than acamd and other dvb sharing options?

[simo]

Re: Latest ACamd

how can i use the acamd plugin with dvbviewer? i always get this message:

19:39:48.648: Exit, no channel data, posible no [PMT Scan] or [PMT not found]...

[kasper17]

Re: Latest ACamd

Here Is The Best Configuration....
Just Copy And Past To Your Acamd.ini

[Acamd]
ShowMonitor=1
Active=1
MultiEcm=0
DisableEmmCache=1

Enjoy It...

[commando2010]

Re: Latest ACamd

I found these settings
the description on the bottom
which corresponds to what a tune

Some extra ACamd.ini options, displayed all default values, use ACamdMonitor.exe for more options
PatWait=2000
CatWait=2000
PmtWait=2000
TsWait=2000
KeyDelay=150
MDAPIWait=10
ResetProviderID=0
EcmRetryError=999
Pri=0
PmtNoNameSearch=0
ForceGeMode=0
DisableNewcamdID=0
DVBViewerStartupDelay=0
IrdetoStartDay=12339
NewCamdLoginAttemp=1
MultiEcmWait=2000
DisableClientOnBadConnection=0
CachePath=
RecordPath=
SoftCsa=0
=======================================
PatWait, CatWait, PmtWait, TsWait timeouts 2000 milliseconds = 2 seconds
KeyDelay 150 milliseconds before sending key
MDAPIWait some TV programs need some time for action
ResetProviderID 1 = ON, 0 = OFF Most off DVB programs do not handle Provider ID good
EcmRetryError count ecm errors, when trigger then stops ecm proccessing
DCW Tweak = 75 milliseconds after sending key, resend odd key
DisKeyDelay = 1 disable default KeyDelay
When no [PMT Scan] is possible or when using gb*x or radegast and on some protocols disable emm support then...
Autoecm is not working proper, you must put a P: entry into ACamd_PMT.txt file
Pri priority cardclient/smartcards 0/1/2
PmtNoNameSearch 0 = OFF, 1 = ON ACamd_PMT.txt when dubble PMT and SID then look at channelname
ForceGeMode 0 = OFF, 1 = ON DVBViewer PRO acts like a DVBViewer GE (different type off decoding)
SoftCsa 0 = OFF, 1 = ON, When 1 use SoftCsa and not FFdecsa
DisableNewcamdID 1 = Disable, 0 = Leave Enabled (when disabled ACamd wont send 9911 id to newcamd server)
IrdetoStartDay (default 12339), 01-08-1997 = 10074, 01-01-2000 = 10957, 14-10-2003 = 12339 (days=unixtime/86400)
NewCamdLoginAttemp 1 try for logging
MultiEcmWait 2000 milliseconds before sending other ECM's
DVBViewerStartupDelay wait default 0 milliseconds after init
DisableClientOnBadConnection 0 = OFF, 1 = ON
CachePath path pointing to cache.ini and chcache.ini
RecordPath path pointing to acamd recordings

[herrr]

Re: Latest ACamd

Re-upload:
It's still very useful!
_http://uptobox.com/yhk2padtfqzv

ACamd V 0.6.2.0
[B]
What's new at 31.12.2010 :

V 0.6.2.0

- Added Anysee support
- Added FTDI support (smargo)
- Added SoftCsa mode
- Changed When disable PMT or CAT scan, disable cache scan to
- Fixed PMT, missing some HD entries
- Fixed lot of small issues, CCcamN, EMM
- Removed Emubox03, GBoxN, MBoxN
- Same MDAPIFilter.ax v0.0.0.6
- Update ACamdMonitor.exe v0.0.0.3

[rahbat]

thanks many