Enigma2 8-10 input DiSEqC switch configuration

[BM300]

Enigma2 8-10 input DiSEqC configuration






If you have an 8-10 input DiSEqC switch, here is how you set it up.

Configuration Mode = advanced

Satellite = Hotbird 13E (Change satellite name here)*
Voltage mode = Polarization
Tone mode = Band
LNB = LNB 8 (Change LNB 1-8)*
DiSEqC mode = 1.1
Toneburst = None
Committed DiSEqC command = none
Fast DiSEqC = no
Sequence repeat = yes
Command order = uncommitted, committed, toneburst
Uncommitted DiSEqC command = Input 8 ( Change LNB 1-8)*
DiSEqC repeats = none
LOF = Universal LNB
Increased voltage = yes - for long cables
Polarity = Auto
Tone Amplitude = 800mV

[acidaries]

Re: Enigma2 8-10 input DiSEqC switch configuration

HI BM300,
I have the second one, the AOUN Diseqc switch and I have used the configuration your described, but get no scan results

[BM300]

Re: Enigma2 8-10 input DiSEqC switch configuration

HI BM300,
I have the second one, the AOUN Diseqc switch and I have used the configuration your described, but get no scan results

Sorry for the late reply acidaries,

Try
Increased voltage = yes