Tweet
ast Version of DVR-Studio HD
DVR-Studio HD 2.09 und DVR-Studio HD 1.74
In this new version of the HD1 and HD2, we have taken care to strengthen the export units.
The following was adapted from the 1.73 / 2.08:
New: Equipment and exports for the Technisat productsHD1/HD2)
(Instructions) Digicorder HD S2
(Instructions) Digicorder HD S2
(Instructions) Digicorder HD K2
(Instructions) Digicorder HD S2X
(Instructions) Digicorder HD K2X
(Instructions) Digit HD8-S
(Instructions) Digit HD8-C
Change: Headsprung improved and optimized for some special receiver (Homecat HS9000, Homecast 8100 series, Kathrein UFS922) (HD1/HD2)
The aforementioned devices have the pictures a more or less large header that can be avoided when opening the record must. So far, here on the largest Haeder of devices directed at what led to devices with a smaller Haeder the first seconds of recording was not recorded.
New: When opening shots of the Humax FOXSAT first EPG block is read (the title and movie description) (HD1/HD2)
Title and description are in the movie description, and for authoring.
New: photos of Lasat receivers correctly read (HD1/HD2)
The receiver has stored on its own in the transport stream control packets that have been shown as an error in processing. These packets are then filtered out automatically.
New: Equipment Export for OPTICUM following products: (HD1/HD2)
(Instructions) TS Opticum HD 9600
Customers should have the 9500 HD Please set the 9600 and try to export a device. If this receiver to play these recordings to the same treatment, please feedback to me.
Change: Adjustments to the internal interface burner (DVD DL, ISO-image format of RE / RW, etc.) (HD2)
The integration of the new internal burner interface has been improved and repaired minor problem with blanks and burners.
Fix: Support Video Search now possible with german umlauts (HD1/HD2)
When entering with German umlauts in the search term, this led to an inadequate search.
DVR-Studio HD 2.09 und DVR-Studio HD 1.74
In this new version of the HD1 and HD2, we have taken care to strengthen the export units.
The following was adapted from the 1.73 / 2.08:
New: Equipment and exports for the Technisat productsHD1/HD2)
(Instructions) Digicorder HD S2
(Instructions) Digicorder HD S2
(Instructions) Digicorder HD K2
(Instructions) Digicorder HD S2X
(Instructions) Digicorder HD K2X
(Instructions) Digit HD8-S
(Instructions) Digit HD8-C
Change: Headsprung improved and optimized for some special receiver (Homecat HS9000, Homecast 8100 series, Kathrein UFS922) (HD1/HD2)
The aforementioned devices have the pictures a more or less large header that can be avoided when opening the record must. So far, here on the largest Haeder of devices directed at what led to devices with a smaller Haeder the first seconds of recording was not recorded.
New: When opening shots of the Humax FOXSAT first EPG block is read (the title and movie description) (HD1/HD2)
Title and description are in the movie description, and for authoring.
New: photos of Lasat receivers correctly read (HD1/HD2)
The receiver has stored on its own in the transport stream control packets that have been shown as an error in processing. These packets are then filtered out automatically.
New: Equipment Export for OPTICUM following products: (HD1/HD2)
(Instructions) TS Opticum HD 9600
Customers should have the 9500 HD Please set the 9600 and try to export a device. If this receiver to play these recordings to the same treatment, please feedback to me.
Change: Adjustments to the internal interface burner (DVD DL, ISO-image format of RE / RW, etc.) (HD2)
The integration of the new internal burner interface has been improved and repaired minor problem with blanks and burners.
Fix: Support Video Search now possible with german umlauts (HD1/HD2)
When entering with German umlauts in the search term, this led to an inadequate search.
Comment