Barry Allen/Update

[gregorii]

Barry Allen 5.2.7



Wally West for BA 5.2 is not yet available !


And NO, BA 5.2 doesn't work with OE 1.5 Images in Flash, only OE 1.6 images are supported in Flash

You can do a driver update in telnet when bootet from flash like this:

ba.sh chroot imagename
ba.sh get_latest_driver
http**********://www.multiupload.com/3GFRFUCXHY


mdev support was removed - better don't patch/fool BA to get it back.

BA 5.2.5 is ONLY for Images with Loader 83 (82 on 800) or higher !!!

You can upgrade an image before booting it:

ba.sh chroot imagename
ipkg update && ipkg upgrade

[krimozak]

Re: Barry Allen/Update

enigma2-plugin-extensions-barryallen_6.0.6_mipsel.ipk

Barry all 6,0 Released kits & Support Thread Rear one! Here is the CHANGE log for the 6.0.6 Releaste BA version. * That is not now Releaster kit and no test kit after short time already runs off, thus is not however as usual now all earlier versions of BA any more supported. * This version runs ONLY more with that original Loader #84 of DMM (with the 7025 one can do it from there ONLY more with the Schummel ipk for blazes to 84 to use attaches also here) * This version of BA was cleared out DRASTIC - the kit is MANY smaller and slimmer and nevertheless thereby should all current things still function. * Which I rausgeschmissen for the first time has, because it is disabelt already some time and asked none more for it, shellscript also in other languages, the BA Plugin is to be let run and the BA Webif have naturally further the full language support. * The multi-boat download center is also finally rausgeflogen, after OoZoon offers its whole feed as web page makes that no more sense - to RIP. * bzip2 was also eliminated, because the MB_*.tar files is made unkomprimiert now, with which it is not necessary ipk in the kit to carry along, who needs bzip2 has it eh on the software feed of most images. * The GET rests BA kit option around to look whether it a new BA kit gives is also rausgeflogen, because that is also on the OoZooN homepage as it in about stands. * Because we in new Bootlogo the Thread the problem have the Barry all signature for a new Bootlogo to position correctly have I ALL Bootlogos raus made up to a black - as in the department stores where the shop window dolls with the new decorating for the first time into black plastic bags to be. I have anyway already consider the whole logos and Fonts in its own Themepack kit for BA to outsource, and/or can for each appropriate tar.gz or ipks from /media/ba/logos and /media/ba/fonts make. * one can do now with disable bootlogo the boat managers logos also completely disabeln, then as background of the BA boat menu the Bootlogo is shown by the Flash. * The boat manager should react now to ALL /dev/input/event *, one must from there nothing more over change, all the same which remote maintenance one uses (old/neu/DMM key board). Therefore also the attitude for it is in the Plugin distant because no longer necessarily - RIP. * Changing the color mode (RGB over,…) with the boat menu rausgeflogen, with connection over HDMI does not need one is not eh the any more and if someone has on the 7025 a problem thereby can one it over also in the Bios change. * There is now a Autoswap feature - as soon as one provided on /media/ba with BA a swapfile (minimum size is now 128MB) becomes this with boats in ALL images (also in the Flash) automatically beswapped completely without fstab or something similar. * With all boxes except the 7025 the enigma2 restart is disabelt with to unpack/secure by images with the installation, enigma2 goes through thus - exactly therefore with the Backupen also for the Swapfile one requires however now. * As ' small Hilfe' for the new images without fixed hard disk mounten has I inserted that if one a new BA image the FIRST times bootet if there still no Settings inside are then /dev/sda1 (which the hard disk is mostly) in the BA image on /media/hdd gemountet thereby one during the Settup Wizzard with the first boat the Settings from there restoren can. As soon as settings in the image are this however no more done, what however if one cleanly stored the mounten of the hard disk in the Settings no more problem be should. * File system check of the BA DEVICE now if one of the Flash is gebootet made if one in telnet bainit 90 enters, whereby all numbers > 89 that cause around further confusion to avoid. * uses one NO OoZooN image (or another image where the loop DEVICE driver in the Kernel are fixed) in the Flash or does not instralliert it not on 7025 then MUST one kernel module loop ipk in the Flash the image after-install, otherwise BA will not function!!! * a Binary and NO MORE Shellscript and that are bainit will also in such a way remain now!!! And the new guidance of Rome EO gulf for Barry all 6,0 gives it here: Barry of all guidance

[aberdojde]

Re: Barry Allen/Update

Barry Allen 6.0.8

Barry Allen Latest Version

[huston]

Re: Barry Allen/Update

I joined this forum to find out how to use my Spiderbox with clines , nlines, etc and comments say Dreambox is better and now ,by chance, I have come across 'Barry Allen'. What does this programme do?. I think I may well be out of my depth . Is there a simple explanation somewhere of it end uses?

[Dumbo]

Re: Barry Allen/Update

I joined this forum to find out how to use my Spiderbox with clines , nlines, etc and comments say Dreambox is better and now ,by chance, I have come across 'Barry Allen'. What does this programme do?. I think I may well be out of my depth . Is there a simple explanation somewhere of it end uses?

Barry Allen is a plugin for multiboot

[sat_sat27]

Re: Barry Allen/Update

Barry Allen 6.5.9

-http://depositfiles.com/files/tvqhup6j4

[luk4asz]

Re: Barry Allen/Update

Barry Allen 9.0.0 and 9.0.1

Changelog of Barry Allen:

* This kit is ONLY for current OE 2.0 Images

* There is now no more readme.txt files, it was too cumbersome to haul with all the translations with and anyway no one has read.

* NFI3 the files for the new flash chips are now supported in the 7020HD

* Image ZIP file with the root as ubifs are now also supported, if your modules and installed from the nandsim ubiattach and ubidetach binaries

* Images with lzo compression should be again now saved correctly

* Now there is a new setting in the plug to remove for better performance on the 800se 500hd and squashfs images in Barry Allen Images.

* Bainit 90 in the Flash file system check does continue but bainit 99 in Barry Allen makes images on the 500hd and 800se now one squashfs recovery.

* Automatic Swapen on boot is enabled again

* Wally West 8.0 kit is now released (but does not work with the old 800, so even a mips32el ipk)

9.0.0
http://www.uploadmb.com/dw.php?id=1361468134
9.0.1 - the same changelog
http://www.uploadmb.com/dw.php?id=1361468850

[krimozak]

Re: Barry Allen/Update

Barry Allen 9.5


enigma2-plugin-extensions-barryallen_9.5_all.rar

[krimozak]

Re: Barry Allen/Update

25/05/2013

Barry Allen ver 9.6

[aberdojde]

Re: Barry Allen/Update

Barry Allen 9.8

The 9.8 is now your WW Naming fix already inside, I hope now is first again rest with new versions

[krimozak]

Re: Barry Allen/Update

Barry Allen 10.0.1

Barry Allen Released Kit & Support Thread
Here is the changelog for the current kit of Barry Allen:

* This kit is ONLY for all current OE 2.0 Images

* Image ZIP file with the root as UBIFS are now also supports things without additionally installed

* Images with lzo UBIFS compression or can be backed up again now

* Now there is a new setting in the plug to remove for better performance on the 800se 500hd and squashfs images in Barry Allen Images.

* Bainit 90 in the flash file system check but still makes bainit 99 images in Barry Allen makes on the 500hd and 800se now a squashfs recovery.

* Automatic Swapen on boot is enabled again and created also equal to 256 MB large swapfile itself

* Wally West 8.0 kit is now released (but does NOT work with the old 800, so even a mips32el ipk) and UBIFS he is not yet tested, we will probably need to 9.X new.

* The install of Debian is now used instead of wheezy sid.

* It now comes nfidump 0.10.X for use in extracting the foreign images has been improved and you can now also only the root with UBIFS as zip save image

* Barry Allen now has a guest mode and you will have to find out what the.

Link to reply to the document by romeo-golf:

Barry Allen Kit & Support Thread

enigma2-plugin-extensions-barryallen_10.0.1_all.rar

[krimozak]

Re: Barry Allen/Update

Barry Allen 10.0.2

The BA 10.0.2 where the unpack fix for VU + nfi with UBIFS is inside

[krimozak]

Re: Barry Allen/Update

Barry Allen 10.0.3

enigma2-plugin-extensions-barryallen_10.0.3_all.rar

[ilanlife]

Re: Barry Allen/Update

Barry Allen 10.0.4

Here is the changelog for the current kit of Barry Allen:
* This kit is ONLY for all current OE 2.0 images and also supports v2 boxes and their images to extract and boats
* Image ZIP file with the root as UBIFS are now also supports things without additionally installed
* Images with lzo UBIFS compression or can be backed up again now
* Now there is a new setting in the plug to remove for better performance on the 800se 500hd and squashfs images in Barry Allen Images.
* Bainit 90 in the flash file system check but still makes bainit 99 images in Barry Allen makes on the 500hd and 800se now a squashfs recovery.
* Automatic Swapen on boot is enabled again and created also equal to 256 MB large swapfile itself
* Wally West 8.0 kit is now released (but does NOT work with the old 800, so even a mips32el ipk) and UBIFS he is not yet tested, we will probably need to 9.X new.
* The install of Debian is now used instead of wheezy sid.
* It now comes nfidump 0.10.X for use in extracting the foreign images has been improved and you can now also only the root with UBIFS as zip save image
* Barry Allen now has a guest mode and you will have to find out what the.

[*Mir*]

Re: Barry Allen/Update

Barry Allen 10.0.5

Thx @ gutemine