DreamBox Clones Firmwares

[VasilisE]

For DreamBox clones firmwares go to this site http://www.8a8f8.com/

[superhefty]

Re: DreamBox Clones Firmwares

Before i start reading the hole linked board: is cloded Firmware compatible to original boxes???

hefty

[VasilisE]

Re: DreamBox Clones Firmwares

If you have an original box you don't need modified firmware. Only clones need that due to the Sim Card that the new Dreambox boxes have

[VasilisE]

Re: DreamBox Clones Firmwares

Here is another link for DM800 clones with SIM2.00 , 2.01 :

http://www.dm800sim2.com/sim2/index.html

[philip2]

Re: DreamBox Clones Firmwares

I think its when you box says 'asta la vista baby'

[ScenicSat]

Re: DreamBox Clones Firmwares

I think its when you box says 'asta la vista baby'

this wouldn't be on enigma2...
you are only not able to load a original image.

i've also running the LT 6 SP2 without problems... and the tuner is much better on the clone. (i have 1 Original and 1 Clone)

[gaivan]

Re: DreamBox Clones Firmwares

this is realy usefull. god bless you guys!

[Resident]

Re: DreamBox Clones Firmwares

You can use any firmware on your clone dm800, you just have to upload the BL76C bootloader right after uploading ANY firmware to it without rebooting the box. After uploading the BL76C bootloader you can reboot it and viola! Its working.

[MIDO2010]

Re: DreamBox Clones Firmwares

DM800 Clone Patched Images Ferrari Edition SSL76FF

sim201-ssl76c-LT.Sixth-dm800-01102010






used for:
Internal or external flash of sim201 dreambox with any bootloader

features:
-All features of original image and fully functional
Code:

REQUIEM FOR…a Dream!!!

Lately things became very hard for most of us in the LT Team regarding personal issues that prevent us from focusing to our main purpose regarding the SAT scene, which is out beloved LT image. We have done too much progress regarding the changes, and the transition from LT5th Campaign to the LT6th Sense was almost flawless. New updates were going public with the use of the Service Packs and bugs that were not revealed during the beta testing era, where eliminated after all. However and apart from our problems, each and every one of us is trying to do its best to keep this "idea" alive and make the Sat community and especially our supporters as happy as possible.
This was supposed to be LT7 but the thing called real life struck us hard, very hard... We then did the best of the situation and here is LT6˝ image. It is a LT6 but updated with latest Enigma2 and OE 1.6. LT7 is postponed for the near future till our beloved head graphics designer Nemesis is back. LT7 will have the same structure as LT6˝ but with the addition of a new/enhanced skin. Till then…sit back and enjoy our beloved image…

MAJOR CHANGES
Openembedded
OE 1.6

Drivers:
DM8000HD PVR, DM800HD,DM500HD 20100623
DM7025 20100804

Secondstage:
DM8000HD PVR, DM800HD, DM7025 #76
DM500HD #79

Enigma2:
20100930 Experimental

LT revision:
3430

Note 1!
If you have the device connected during boot then it will be mounted by /etc/fstab and in such case mountpoints below will be used. This is for your harddisc and if you choose to use LT Link Manager or LT EPG Cachelink Manager with CF or USB Stick.

Hotplug, devices you insert when Enigma2 is running, is handled by autofs and all thoose devices are mounted at /autofs and use the devicename from /dev like /autofs/sda1

DM800HD PVR
/dev/hdda1 /media/hdd auto defaults 0 0
/dev/card_sd1 /media/sd auto defaults 0 0
/dev/card_cf1 /media/cf auto defaults 0 0
/dev/card_sm1 /media/sm auto defaults 0 0
/dev/card_ms1 /media/ms auto defaults 0 0
/dev/usb_lower1 /media/usb auto defaults 0 0
/dev/usb_upper1 /media/usb1 auto defaults 0 0
/dev/usb_front1 /media/usb2 auto defaults 0 0
/dev/usb_internal1 /media/usb3 auto defaults 0 0

If you rebuild your dm500hd to activate USB we recommend that you add some kind of over-current protection since otherwise you can destroy your box!

LT Team takes no responsibility for your box if you modify it and be aware that your Warranty will be void.


Note 2!
Since this is image is based on LT7's code the LT Link Manager controlfile is not lt6links.cfg anymore it is now lt7links.cfg

Note 3!
DM7025 image is experimental and might not work yet. No further support for this image will be given.

A big special thanx to all the Beta testers involved! Those are the "behind-the-scene" heroes trying to make us all better: t40t40, Leatherface, Jimdefruit, zumzum, acid-burn, dream_dxb, emitec, psykix, Vlad, Zenox, Zeranovsky, ~Ryu~, AVR-rulez, hassogava, s_a and all the others that i might forget...

Best regards
/LT-Team®


installation:
by internet explorer or dreamup
bootloader will upgraded to sim201-76c(no need to upload sim201-bl76-already included)

Download

http://www.megaupload.com/?d=21HVT52M

[rizwan]

Re: DreamBox Clones Firmwares

I have clone box. Please guide me how to put image on usb-flash and then use it.

[munsterguy]

Re: DreamBox Clones Firmwares

DreamBox Clones Firmwares::::: which is the best for a Dreambox DM 800 HD PVR?