Dreambox DM 800 PVR

[bosse69]

Hello.This is my first post to this forum and i'm kinda new to this.Have an old dreambox clone DM 800HD PVR that i try to recover from no ca found error.I have to use dreamup because can't connect with browser.
Have tried numerous different images without success.I've been trying to load a bootloader first reeboot and then load the image and bl and image directly afterwards but no success.Can anybody tell me what files i should use?
It has a sim 201 card and the original bootloader was #76.

[naiarty]

Re: Dreambox DM 800 PVR

oNLY WAY TO REFLASH IS WITH ONE NUL MODEM CABLE AND ONE PATCHED DREAM UP TRITO SEARCH IN DN 800 FORUM AND REFLASH ONE IMAGE WITH SAME BOOTLOADER (76) AND AFTER YOU CAN CHANGE WITH BROWSER

[rizwan]

Re: Dreambox DM 800 PVR

You need patched Image, not original

[kalpikos]

Re: Dreambox DM 800 PVR

Hello bosse69

Here is the solution:

1) Use DreamUp 1.3.3 with serial (null modem) cable
2) Choose COM1, connect, power ON DM800 and wait
3) After a few seconds the DM800 screen will come back with an IP address
4) Type in that address in IE
5) Flash first a BootLoader (ex: #76) reboot DM800 and hold power button
7) Wait for IP to appear on DM800 screen
8)Type in that address in IE
9) Flash your desired image (patched Image suitable for your clone box)

I wish you good luck