How to install newcamd in DM500s and configuration

[jiyesh.vs]

I know how to add c lines for cccam.cfg as it is very easy step.But I don't know how to configure for newcamd.When I go to addons I can see Newcamd(6.10b) and Newcamd config(6.10b) and installed in my dreambox.
Please give me step by step directions to configure it.

for e.g I got the following information,then what I will do with that.I hope you will help me..Thanks in Advance.

PROTOKOL : NewCamd5.25
HOST : free.testing.com
DESKEY : 01 02 03 04 05 06 07 08 09 10 11 12 13 14
PORT : 2000 JSC SPORT

USER : fes-1 –> fes-10000

PASS : www.testing.com

[bro23]

Re: How to install newcamd in DM500s and configuration

You can N Line write CCcam example;

N: satlover.eu 100 user pass 01 02 03 04 05 06 07 08 09 10 11 12 13 14

[jiyesh.vs]

Re: How to install newcamd in DM500s and configuration

You can N Line write CCcam example;

N: satlover.eu 100 user pass 01 02 03 04 05 06 07 08 09 10 11 12 13 14

Dear bro23,

Thank you for your help.So I will choose which softcam.
If cccam is fine then i just understood,i just need to add it under clines inside cccam.cfg

Or do I need to select Newcamd or any other?

Sorry for troubling you.

[gianni253]

Re: How to install newcamd in DM500s and configuration

I know how to add c lines for cccam.cfg as it is very easy step.But I don't know how to configure for newcamd.When I go to addons I can see Newcamd(6.10b) and Newcamd config(6.10b) and installed in my dreambox.
Please give me step by step directions to configure it.

for e.g I got the following information,then what I will do with that.I hope you will help me..Thanks in Advance.

PROTOKOL : NewCamd5.25
HOST : free.testing.com
DESKEY : 01 02 03 04 05 06 07 08 09 10 11 12 13 14
PORT : 2000 JSC SPORT

USER : fes-1 –> fes-10000

PASS : www.testing.com

Newcamd is a protocol.
Mgcamd is an emulator (and newcamd is it's protocol).
Don't confuse the two things ...
Do you really need to install and configure newcamd or you simply need to connect to a newcamd server ?
If you are in the second option, you can also use cccam with the nline that bro23 wrote above.

Bye

[jiyesh.vs]

Re: How to install newcamd in DM500s and configuration

Newcamd is a protocol.
Mgcamd is an emulator (and newcamd is it's protocol).
Don't confuse the two things ...
Do you really need to install and configure newcamd or you simply need to connect to a newcamd server ?
If you are in the second option, you can also use cccam with the nline that bro23 wrote above.

Bye

Dear gianni253,
" Excellent "help...Now I got the point. I will just add N lines to connect to newcamd server using CCcam.

Both of you rocks 5* for you.

[kalpikos]

Re: How to install newcamd in DM500s and configuration

Hi mate

as @gianni253 said, you can use cccam for a N-line, or even you can use mgcamd.
Download mgcamd and go to var/keys.
There you must create a blank file named newcamd.list.
Then, put a CWS line in it.
e.g.
CWS = free.testing.com 2000 fes-1 wwwtestingcom 01 02 03 04 05 06 07 08 09 10 11 12 13 14

[jiyesh.vs]

Re: How to install newcamd in DM500s and configuration

Hi mate

as @gianni253 said, you can use cccam for a N-line, or even you can use mgcamd.
Download mgcamd and go to var/keys.
There you must create a blank file named newcamd.list.
Then, put a CWS line in it.
e.g.
CWS = free.testing.com 2000 fes-1 wwwtestingcom 01 02 03 04 05 06 07 08 09 10 11 12 13 14

Dear Friend,
Thank you for another useful info...Definitely I will try all of these.

Take care.

[kalpikos]

Re: How to install newcamd in DM500s and configuration

Before you put the line as I said you above, put in newcamd.list these:

CWS_KEEPALIVE = 300
CWS_INCOMING_PORT = 21000

and then

CWS = free.testing.com 2000 fes-1 wwwtestingcom 01 02 03 04 05 06 07 08 09 10 11 12 13 14

If you have some problem with mg_cfg , tell us to help you...

[balocamillo]

Re: How to install newcamd in DM500s and configuration

Help to use this newcamd 5.25 config
The server give this line. how can we use that?
PROTOKOL : NewCamd5.25
HOST : exemple.bo
DESKEY : 01 02 03 04 05 06 07 08 09 10 11 12 13 14

PORT : 2009 CAID : 0500 J***sPORT PROVIDER : 042400
PORT : 2006 CAID : 0500 ***Sat PROVIDER : 032830
PORT : 2067 caid : 0100 *****sat fullhd PROVIDER : 003311 003315 0033170
PORT : 2053 CAID : 0604 *** PROVIDER : 000000,000001,000002
PORT : 2031 CAID : 0D00 ***Turk PROVIDER : 000000
PORT : 2011 CAID : 0100 ***+ PROVIDER : 000065,000068
PORT : 2008 CAID : 1702*** PROVIDER : 000000
PORT : 2007 CAID : 1810 ***tal+ nagra PROVIDER : 000000,004001,004101
PORT : 2013 CAID : 0100 ****al+ seca PROVIDER : 005001,004106,004108
PORT : 2012 CAID : 0100 MEO seca PROVIDER : 005221,005221,005225
PORT : 2032 CAID : 1802 TVCabo Nagra PROVIDER : 000000,004801,004901
PORT : 2036 CAID : 0BAA TRING PROVIDER : 000000
PORT : 2002 CAID : 0963 ****UK PROVIDER : 000000
PORT : 2003 CAID : 1802 ****TV PROVIDER : 000000 002011 002111

USER : superbhd1 -> superbhd1000

pass: amigos.com

[gianni253]

Re: How to install newcamd in DM500s and configuration

Following line is for first provider

CWS = exemple.bo 2009 superbhd1 amigos.com 01 02 03 04 05 06 07 08 09 10 11 12 13 14

Add one line for every provider/port and optionally change userid in the range specified.

[aplok]

Re: How to install newcamd in DM500s and configuration

# newcamd.list
CWS = exemple.bo 2009 superbhd1 amigos.com 01 02 03 04 05 06 07 08 09 10 11 12 13 14

# CCcam.cfg
N: exemple.bo 2009 superbhd1 amigos.com 01 02 03 04 05 06 07 08 09 10 11 12 13 14 0

... and in oscam.server ...

it should become

[reader]
label = lbl_exemple.bo
enable = 1
protocol = newcamd

# ???
device = exemple.bo,2009
# ???
device = exemple.be,2002,2003,2006,2007,2008,2009,2011,2012 ,2013,2031,2032,2036,2053,2067
# ???

key = 0102030405060708091011121314

user = superbhd1
password = amigos.com
group = 20
fallback = 1


correct ?

[balocamillo]

Re: How to install newcamd in DM500s and configuration

thx gianni253,
thx aplok, I'am a client, the simple insert data in newcamd.lst and cccam.cfg is sufficent?

[gianni253]

Re: How to install newcamd in DM500s and configuration

thx gianni253,
the simple insert data in newcamd.lst and cccam.cfg is sufficent?

Yes, it's enough.
Of course, you will use only one of the emus ...

[pan1300]

Re: How to install newcamd in DM500s and configuration

hi balocamillo

indeed, enough as @gianni253 said - also you must be attached to the internet and your server/settings/setup should be active as newcamd (but you most probably already know this)

[balocamillo]

Re: How to install newcamd in DM500s and configuration

many thanks guys!