Db500hd

[romanblood]

Hi,can someone help me pls? i have db500hd original and after years decide to use it back and flashed with openpli 7.3,and seames everything good but when i switched it back after flash, the front green led keep fixed light and inside box there is a red led light fixed too,and the fan dont work,i tried to wakeup with dreamup V1.3.3.7 but nothing happen.

[Toysoft]

You need to use original images in your original box, you cannot use Clone images without upgrading the Sim in the box.

You could change the sim, and then have access to the latest images, see link below to obtain your new sim,

DM500HD Sim :

https://jam3.japhar.com/japhar/index.php/product/japhar-dm500hd/

Support for your original box / sim, ceased in 2015, and latest official OpenPLi is 4.0 for it if you don't upgrade the sim.

You now have to use JapharFlasher/DreamUp to put back the original SSL Bootloader/Image, but are still stuck to old 2015 software with that old unsupported sim.

If you cannot wake it up (you should use USB Service Port with PC/DreamUP + RJ45 to Router), you can still install the compatible sim with the image you installed (OpenPLi 7.3star is for Japhar Sim), and your box will boot smoothly without the need of DreamUp, if you swap to Japhar Sim as software loaded if OpenPLi 7.3star will be compatible with it.

TS