Tweet
DM800se HD Clone - help & Advice needed.
Hi Guys,
I could really appreciate some help and advice on this subject as I'm fairly new to the dream box clone scene and am struggling to fix this problem.
I received a DM800se HD CLONE today that was running SunRay4 Sim2, I proceeded to update the box to use the NewNigma2 V4.0.1 image that i have running on another box.
This initially appeared to work as you'd expect, the image updated and the box rebooted. upon reboot the newnigma2 image prompted me that an update was available and should i download it. figuring that this would be a good time to update, however at the end of the update the box had appeared to have frozen (the software confirmed the image was updated) so i switched the box off and back on.
Since then the box won't boot properly, i have attempted to re flash the box a few times by holding the power button in when switching on and using the flash website and also using sunray dream up to flash an image.
non of these manage to complete (dream up says the image is wrong) and the website normally doesn't get chance to finish before the small oled screen goes off (black) and the box stops responding.
when the box freezes the green light inside stays on but the 5 red led's all light up and go dim red.
i've emailed the company i bought the box from incase its actually a faulty box, but i'd also love some help and suggestions on whats going on.
the flash recovery website says the boot loader is version 84 if this helps.
Kris
I could really appreciate some help and advice on this subject as I'm fairly new to the dream box clone scene and am struggling to fix this problem.
I received a DM800se HD CLONE today that was running SunRay4 Sim2, I proceeded to update the box to use the NewNigma2 V4.0.1 image that i have running on another box.
This initially appeared to work as you'd expect, the image updated and the box rebooted. upon reboot the newnigma2 image prompted me that an update was available and should i download it. figuring that this would be a good time to update, however at the end of the update the box had appeared to have frozen (the software confirmed the image was updated) so i switched the box off and back on.
Since then the box won't boot properly, i have attempted to re flash the box a few times by holding the power button in when switching on and using the flash website and also using sunray dream up to flash an image.
non of these manage to complete (dream up says the image is wrong) and the website normally doesn't get chance to finish before the small oled screen goes off (black) and the box stops responding.
when the box freezes the green light inside stays on but the 5 red led's all light up and go dim red.
i've emailed the company i bought the box from incase its actually a faulty box, but i'd also love some help and suggestions on whats going on.
the flash recovery website says the boot loader is version 84 if this helps.
Kris
Comment