Dreambox 800 hd se is dead

[knap92]

Hello to all

Need some advies
The dreambox 800 hd se ,estar sim ,is dead,

Thanks a lot

Regards

[kalpikos]

Re: Dreambox 800 hd se is dead

Hello my friend

I'm afraid that your clone has very serious problem.
The symptoms make me to say that your motherboard is dead.

I remember that I saw motherboards of dreambox clones in China's stores in very good prices but the decision if it is worth to be repaired, is yours because the total price is the half price of a new clone.

The price in China of a new m/b for dm800se is about 80€ + taxes + shipping cost , and that means that the total cost will be about 100€.

[selopesco1]

Re: Dreambox 800 hd se is dead

Could be a problem on internal power supply.
Check inside if there's a problem on capacitors or something like that.
If internal voltage is not correct sometimes the cpu goes under protection.

[knap92]

Re: Dreambox 800 hd se is dead

Thanks for the responds,

selopesco1 how to fix that?
I have behind me the moetherboard

Regards

[aplok]

Re: Dreambox 800 hd se is dead

The dreambox 800 hd se ,estar sim ,is dead,

? do you remember when your dbox started to dy ?

- on boot

- on running

? any fuse on board ?

[knap92]

Re: Dreambox 800 hd se is dead

Hey,

after rebooting the dm i got the issue
dont see nothing anormal on the moetherboard
maybe some condosateur is deffect but wich one!!?

[selopesco1]

Re: Dreambox 800 hd se is dead

Some friends tell me :if you have a doubt change all (few money);because in case of motherboard broken i think nothing to do.

[aplok]

Re: Dreambox 800 hd se is dead

ok, so it happens seemingly

just after reboot

--- this scenario converges within those i had with other device like:

modem, printer alim, usb alim

in the fact that at those device reboot, i heard a very light but audible toc

which suggests the scenario of

a condensator overheating,
with condensator container crack,
followed by dedicated anti fire polymerisation of the dead condensator

(those alim are better than fuku ... )

if so for you, try to find such a disformed condensator ...

[knap92]

Re: Dreambox 800 hd se is dead

Thanks a lot,

for me i dont see any broken condensator when a look inside the motherboard...i thinking to buy new one but were? dreambox 800hd se estar sim

Regards

[kalpikos]

Re: Dreambox 800 hd se is dead

You just need a motherboard for dreambox 800se.
You have to remove the sim card from the old m/b and place it in the new one.

I found the m/b here:
-http://www.mixeshop.com/motherboard-for-800se_p1331.html

but I haven't read good reviews for this store, so maybe you have to be careful with it.
It would be better if you can find it on a local store.

[knap92]

Re: Dreambox 800 hd se is dead

Hello,

Thanks for the respond

I wil look on it but first impresion is not the same mainboard wat i have ...looking foor motherboard dreambox 800hd se model estar

[kalpikos]

Re: Dreambox 800 hd se is dead

All motherboards are the same for dm800se.
Your sim is estar not the m/b.
There is not m/b model estar.

Btw, did you think to buy a genuine receiver and get rid of the clones?
You can take a look to vu+ receivers.

[knap92]

Re: Dreambox 800 hd se is dead

Hey,

I took look on another dreambox 800hd se ferrari SIM and the mainboard is not the same
on the mainboard of estar you have botton miniflash .....and to fixe the mainboard is also not the same .
Maybe is option kalpikos to buy vu+ but they are also clone
for moment i wil try to fix wat i have and later i wil see

Thanks

Regards

[kalpikos]

Re: Dreambox 800 hd se is dead

Yes , there also vu+ clones but don't buy a vu+ clone.
Buy a genuine box and enjoy it.
Clones have many problems as you have seen.

About the m/b...
you are right,
There are 2 types of m/b, with the mini flash button and without it.
You have to find the one with the mini flash button.

[aplok]

Re: Dreambox 800 hd se is dead

... the mainboard of estar you have botton miniflash ....

so, on your genuine 800hd mb, you confirm you have such a miniflash button

but where ?

on the motherboard itself ? on the rear ?
do you have a photo ?

thx